sample upload PHYS 211
Popular in Mechanics
Popular in Physics 2
This 2 page Class Notes was uploaded by Meehika Patel on Tuesday January 26, 2016. The Class Notes belongs to PHYS 211 at University of Illinois at Urbana-Champaign taught by George D. Gollin in Fall 2015. Since its upload, it has received 20 views. For similar materials see Mechanics in Physics 2 at University of Illinois at Urbana-Champaign.
Reviews for sample upload
The content was detailed, clear, and very well organized. Will definitely be coming back to Meehika for help in class!
Report this Material
What is Karma?
Karma is the currency of StudySoup.
You can buy or earn more Karma at anytime and redeem it for class notes, study guides, flashcards, and more!
Date Created: 01/26/16
STRESS ANALYSIS For our stress analysis, we chose to use the clip as it will be a part that will have stresses put upon it in real life. For the clip material I chose mild steel as the clip seemed to be magnetic. First is the Von Misus Stress which had a value of 657.7 MPa Next I ran the Displacement which had a maximum value of 3.46mm Then I ran the Safety Factor which had a minimum value of 0.31. I also did a convergence plot for the clip and the convergence rate was 26.21% I also did a stress analysis on the clip using Aluminum 6061 as the material. When I ran this stress analysis I found that the Aluminum clip had a displacement of 10.96 mm and a Safety Factor of 0.42. While the Aluminum clip had a much larger displacement, it also had a higher safety factor. On the surface this might seem like a miscalculation, but upon further inspection this makes sense since the aluminum is more likely to bend while the steel is more likely to snap and break.
Are you sure you want to buy this material for
You're already Subscribed!
Looks like you've already subscribed to StudySoup, you won't need to purchase another subscription to get this material. To access this material simply click 'View Full Document'