×
Get Full Access to Microelectronic Circuits - 6 Edition - Chapter 4 - Problem 4.78
Get Full Access to Microelectronic Circuits - 6 Edition - Chapter 4 - Problem 4.78

×

# It is required to use a peak rectifier to design a dc

ISBN: 9780195323030 147

## Solution for problem 4.78 Chapter 4

Microelectronic Circuits | 6th Edition

• Textbook Solutions
• 2901 Step-by-step solutions solved by professors and subject experts
• Get 24/7 help from StudySoup virtual teaching assistants

Microelectronic Circuits | 6th Edition

4 5 1 353 Reviews
30
4
Problem 4.78

It is required to use a peak rectifier to design a dc power supply that provides an average dc output voltage of 15 V on which a maximum of 1-V ripple is allowed. The rectifier feeds a load of 150 . The rectifier is fed from the line voltage (120 V rms, 60 Hz) through a transformer. The diodes available have 0.7-V drop when conducting. If the designer opts for the half-wave circuit:(a) Specify the rms voltage that must appear across the transformer secondary.(b) Find the required value of the filter capacitor. (c) Find the maximum reverse voltage that will appear across the diode, and specify the PIV rating of the diode. (d) Calculate the average current through the diode during conduction. (e) Calculate the peak diode current.

Step-by-Step Solution:
Step 1 of 3

ECE 270 Module 3 Lecture Notes : Learning Objective : The ability to analyze the third of four types of circuits : sequential circuits Experiments 8 – 12 focus on this module. This is a big module and a vital one for ECE 337, and ECE 362. You need the concepts! Credits Used for these Notes : ECE 270 Lecture Summary Notes and Presentations for Diagrams Digital System Design by John F Wakerly 4 Edition text Contents of these Notes: Module 3 A - Bistable Elements  Describe the difference between sequential and combinational circuits.  Define clock frequency and duty cycle.  Define metastability.  Define the state transition diagram and distinguish between feedback and clocked synchronous state machine.  Describe the operation of a bi-stable. Mo

Step 2 of 3

Step 3 of 3

##### ISBN: 9780195323030

Microelectronic Circuits was written by and is associated to the ISBN: 9780195323030. The answer to “It is required to use a peak rectifier to design a dc power supply that provides an average dc output voltage of 15 V on which a maximum of 1-V ripple is allowed. The rectifier feeds a load of 150 . The rectifier is fed from the line voltage (120 V rms, 60 Hz) through a transformer. The diodes available have 0.7-V drop when conducting. If the designer opts for the half-wave circuit:(a) Specify the rms voltage that must appear across the transformer secondary.(b) Find the required value of the filter capacitor. (c) Find the maximum reverse voltage that will appear across the diode, and specify the PIV rating of the diode. (d) Calculate the average current through the diode during conduction. (e) Calculate the peak diode current.” is broken down into a number of easy to follow steps, and 128 words. This full solution covers the following key subjects: voltage, diode, rectifier, rms, average. This expansive textbook survival guide covers 15 chapters, and 1344 solutions. This textbook survival guide was created for the textbook: Microelectronic Circuits, edition: 6. Since the solution to 4.78 from 4 chapter was answered, more than 283 students have viewed the full step-by-step answer. The full step-by-step solution to problem: 4.78 from chapter: 4 was answered by , our top Engineering and Tech solution expert on 11/15/17, 04:00PM.

#### Related chapters

Unlock Textbook Solution

Enter your email below to unlock your verified solution to:

It is required to use a peak rectifier to design a dc