- Chapter 1: Electric Circuit Variables
- Chapter 1.2: Electric Circuits and Current
- Chapter 1.3: Systems of Units
- Chapter 1.5: Power and Energy
- Chapter 1.7: How Can We Check . . . ?
- Chapter 10: Sinusoidal Steady-State Analysis
- Chapter 10.1: Op Amps in AC Circuits
- Chapter 10.11: The Complete Response
- Chapter 10.12: Using MATLAB to Analyze Electric Circuits
- Chapter 10.2: Sinusoidal Sources
- Chapter 10.3: Phasors and Sinusoids
- Chapter 10.4: Impedances
- Chapter 10.5: Series and Parallel Impedances
- Chapter 10.6: Mesh and Node Equations
- Chapter 10.7: Thevenin and Norton Equivalent Circuits
- Chapter 10.8: Superposition
- Chapter 10.9: Phasor Diagrams
- Chapter 11: AC Steady-State Power
- Chapter 11.1: The Ideal Transformer
- Chapter 11.11: How Can We Check . . . ?
- Chapter 11.3: Instantaneous Power and Average Power
- Chapter 11.4: Effective Value of a Periodic Waveform
- Chapter 11.5: Complex Power
- Chapter 11.6: Power Factor
- Chapter 11.7: The Power Superposition Principle
- Chapter 11.8: The Maximum Power Transfer Theorem
- Chapter 11.9: Coupled Inductors
- Chapter 12: Three-Phase Circuits
- Chapter 12.2: Three-Phase Voltages
- Chapter 12.3: The Y-to-Y Circuit
- Chapter 12.4: The D-Connected Source and Load
- Chapter 12.5: The Y-to-D Circuit
- Chapter 12.6: Balanced Three-Phase Circuits
- Chapter 12.7: Instantaneous and Average Power in a Balanced Three-Phase Load
- Chapter 12.8: Two-Wattmeter Power Measurement
- Chapter 12.9: How Can We Check . . . ?
- Chapter 13: Frequency Response
- Chapter 13.2: Gain, Phase Shift, and the Network Function
- Chapter 13.3: Bode Plots
- Chapter 13.4: Resonant Circuits
- Chapter 13.6: Plotting Bode Plots Using MATLAB
- Chapter 13.8: How Can We Check . . . ?
- Chapter 14: The Laplace Transform
- Chapter 14.1: Stability
- Chapter 14.11: Partial Fraction Expansion Using MATLAB
- Chapter 14.12: How Can We Check . . . ?
- Chapter 14.2: Laplace Transform
- Chapter 14.3: Pulse Inputs
- Chapter 14.4: Inverse Laplace Transform
- Chapter 14.5: Initial and Final Value Theorems
- Chapter 14.6: Solution of Differential Equations Describing a Circuit
- Chapter 14.7: Circuit Analysis Using Impedance and Initial Conditions
- Chapter 14.8: Transfer Functions
- Chapter 14.9: Convolution
- Chapter 15: Fourier Series and Fourier Transform
- Chapter 15.12: Convolution and Circuit Response
- Chapter 15.14: How Can We Check . . . ?
- Chapter 15.2: The Fourier Series
- Chapter 15.3: Symmetry of the Function f (t)
- Chapter 15.5: Exponential Form of the Fourier Series
- Chapter 15.6: The Fourier Spectrum
- Chapter 15.7: Circuits and Fourier Series
- Chapter 15.9: The Fourier Transform
- Chapter 16: Filter Circuits
- Chapter 16.3: Filters
- Chapter 16.4: Second-Order Filters
- Chapter 16.5: High-Order Filters
- Chapter 16.7: How Can We Check . . . ?
- Chapter 17: Two-Port and Three-Port Networks
- Chapter 17.2: T-to-P Transformation and Two-Port Three-Terminal Networks
- Chapter 17.3: Equations of Two-Port Networks
- Chapter 17.4: Z and Y Parameters for a Circuit with Dependent Sources
- Chapter 17.5: Hybrid and Transmission Parameters
- Chapter 17.6: Relationships Between Two-Port Parameters
- Chapter 17.7: Interconnection of Two-Port Networks
- Chapter 17.8: How Can We Check . . . ?
- Chapter 2: Circuit Elements
- Chapter 2.1: How Can We Check . . . ?
- Chapter 2.2: Engineering and Linear Models
- Chapter 2.4: Resistors
- Chapter 2.5: Independent Sources
- Chapter 2.6: Voltmeters and Ammeters
- Chapter 2.7: Dependent Sources
- Chapter 2.8: Transducers
- Chapter 2.9: Switches
- Chapter 3: Resistive Circuits
- Chapter 3.2: Kirchhoffs Laws
- Chapter 3.3: Series Resistors and Voltage Division
- Chapter 3.4: Parallel Resistors and Current Division
- Chapter 3.5: Series Voltage Sources and Parallel Current Sources
- Chapter 3.6: Circuit Analysis
- Chapter 3.7: Analyzing Resistive Circuits Using MATLAB
- Chapter 3.8: How Can We Check . . . ?
- Chapter 4: Methods of Analysis of Resistive Circuits
- Chapter 4.11: How Can We Check . . . ?
- Chapter 4.2: Node Voltage Analysis of Circuits with Current Sources
- Chapter 4.3: Node Voltage Analysis of Circuits with Current and Voltage Sources
- Chapter 4.4: Node Voltage Analysis with Dependent Sources
- Chapter 4.5: Mesh Current Analysis with Independent Voltage Sources
- Chapter 4.6: Mesh Current Analysis with Current and Voltage Sources
- Chapter 4.7: Mesh Current Analysis with Dependent Sources
- Chapter 4.8: The Node Voltage Method and Mesh Current Method Compared
- Chapter 4.9: Circuit Analysis Using MATLAB
- Chapter 5: Circuit Theorems
- Chapter 5.2: Source Transformations
- Chapter 5.3: Superposition
- Chapter 5.4: Thevenin s Theorem
- Chapter 5.5: Nortons Equivalent Circuit
- Chapter 5.6: Maximum Power Transfer
- Chapter 5.8: Using PSpice to Determine the Thevenin Equivalent Circuit
- Chapter 5.9: How Can We Check . . . ?
- Chapter 6: The Operational Amplifier
- Chapter 6.1: How Can We Check . . . ?
- Chapter 6.3: The Ideal Operational Amplifier
- Chapter 6.4: Nodal Analysis of Circuits Containing Ideal Operational Amplifiers
- Chapter 6.5: Design Using Operational Amplifiers
- Chapter 6.6: Operational Amplifier Circuits and Linear Algebraic Equations
- Chapter 6.7: Characteristics of Practical Operational Amplifiers
- Chapter 7: Energy Storage Elements
- Chapter 7.11: How Can We Check . . . ?
- Chapter 7.2: Capacitors
- Chapter 7.3: Energy Storage in a Capacitor
- Chapter 7.4: Series and Parallel Capacitors
- Chapter 7.5: Inductors
- Chapter 7.6: Energy Storage in an Inductor
- Chapter 7.7: Series and Parallel Inductors
- Chapter 7.8: Initial Conditions of Switched Circuits
- Chapter 7.9: Operational Amplifier Circuits and Linear Differential Equations
- Chapter 8: The Complete Response of RL and RC Circuits
- Chapter 8.1: How Can We Check . . . ?
- Chapter 8.3: The Response of a First-Order Circuit to a Constant Input
- Chapter 8.4: The Response of a First-Order Circuit to a Constant Input
- Chapter 8.5: Stability of First-Order Circuits
- Chapter 8.6: The Unit Step Source
- Chapter 8.7: The Response of a First-Order Circuit to a Nonconstant Source
- Chapter 9: The Complete Response of Circuits with Two Energy Storage Elements
- Chapter 9.1: Roots in the Complex Plane
- Chapter 9.11: How Can We Check . . . ?
- Chapter 9.2: Differential Equation for Circuits with Two Energy Storage Elements
- Chapter 9.3: Solution of the Second-Order Differential EquationThe Natural Response
- Chapter 9.4: Natural Response of the Unforced Parallel RLC Circuit
- Chapter 9.5: Natural Response of the Critically Damped Unforced Parallel RLC Circuit
- Chapter 9.6: Natural Response of an Underdamped Unforced Parallel RLC Circuit
- Chapter 9.7: Forced Response of an RLC Circuit
- Chapter 9.8: Complete Response of an RLC Circuit
- Chapter 9.9: State Variable Approach to Circuit Analysis

# Introduction to Electric Circuits 9th Edition - Solutions by Chapter

## Full solutions for Introduction to Electric Circuits | 9th Edition

ISBN: 9781118477502

Introduction to Electric Circuits | 9th Edition - Solutions by Chapter

Get Full SolutionsThis textbook survival guide was created for the textbook: Introduction to Electric Circuits, edition: 9. Introduction to Electric Circuits was written by and is associated to the ISBN: 9781118477502. Since problems from 146 chapters in Introduction to Electric Circuits have been answered, more than 16542 students have viewed full step-by-step answer. The full step-by-step solution to problem in Introduction to Electric Circuits were answered by , our top Engineering and Tech solution expert on 03/14/18, 07:39PM. This expansive textbook survival guide covers the following chapters: 146.