Answer: A sinusoidal electromagnetic wave having a

By measuring the electric and magnetic fields at a point in space where there is an electromagnetic wave, can you determine the direction from which the wave came? Explain.

When driving on the upper level of the Bay Bridge, westbound from Oakland to San Francisco, you can easily pick up a number of radio stations on your car radio. But when driving eastbound on the lower level of the bridge, which has steel girders on either side to support the upper level, the radio reception is much worse. Why is there a difference?

Give several examples of electromagnetic waves that are encountered in everyday life. How are they all alike? How do they differ?

Sometimes neon signs located near a powerful radio station are seen to glow faintly at night, even though they are not turned on. What is happening?

Is polarization a property of all electromagnetic waves, or is it unique to visible light? Can sound waves be polarized? What fundamental distinction in wave properties is involved? Explain

Suppose that a positive point charge q is initially at rest on the x-axis, in the path of the electromagnetic plane wave described in Section 32.2. Will the charge move after the wave front reaches it? If not, why not? If the charge does move, describe its motion qualitatively. (Remember that E S and B S have the same value at all points behind the wave front.)

The light beam from a searchlight may have an electricfield magnitude of 1000 V>m, corresponding to a potential difference of 1500 V between the head and feet of a 1.5-m-tall person on whom the light shines. Does this cause the person to feel a strong electric shock? Why or why not?

For a certain sinusoidal wave of intensity I, the amplitude of the magnetic field is B. What would be the amplitude (in terms of B) in a similar wave of twice the intensity?

The magnetic-field amplitude of the electromagnetic wave from the laser described in Example 32.1 (Section 32.3) is about 100 times greater than the earths magnetic field. If you illuminate a compass with the light from this laser, would you expect the compass to deflect? Why or why not?

Most automobiles have vertical antennas for receiving radio broadcasts. Explain what this tells you about the direction of polarization of E S in the radio waves used in broadcasting

If a light beam carries momentum, should a person holding a flashlight feel a recoil analogous to the recoil of a rifle when it is fired? Why is this recoil not actually observed?

A light source radiates a sinusoidal electromagnetic wave uniformly in all directions. This wave exerts an average pressure p on a perfectly reflecting surface a distance R away from it. What average pressure (in terms of p) would this wave exert on a perfectly absorbing surface that was twice as far from the source?

Does an electromagnetic standing wave have energy? Does it have momentum? Are your answers to these questions the same as for a traveling wave? Why or why not?

(a) How much time does it take light to travel from the moon to the earth, a distance of 384,000 km? (b) Light from the star Sirius takes 8.61 years to reach the earth. What is the distance from earth to Sirius in kilometers?

Consider each of the electric- and magnetic-field orientations given next. In each case, what is the direction of propagation of the wave? (a) E S in the +x-direction, B S in the +y-direction; (b) E S in the -y-direction, B S in the +x-direction; (c) E S in the +z-direction, B S in the -x-direction; (d) E S in the +y-direction, B S in the -z-direction.

A sinusoidal electromagnetic wave is propagating in vacuum in the +z@direction. If at a particular instant and at a certain point in space the electric field is in the +x@direction and has magnitude 4.00 V>m, what are the magnitude and direction of the magnetic field of the wave at this same point in space and instant in time?

Consider each of the following electric- and magneticfield orientations. In each case, what is the direction of propagation of the wave? (a) E S = End, B S = -Bne; (b) E S = Ene, B S = Bnd; (c) E S = -Ek n, B S = -Bnd; (d) E S = End, B S = -Bk

Medical X-rays. Medical x rays are taken with electromagnetic waves having a wavelength of around 0.10 nm in air. What are the frequency, period, and wave number of such waves?

Ultraviolet Radiation. There are two categories of ultraviolet light. Ultraviolet A (UVA) has a wavelength ranging from 320 nm to 400 nm. It is necessary for the production of vitamin D. UVB, with a wavelength in vacuum between 280 nm and 320 nm, is more dangerous because it is much more likely to cause skin cancer. (a) Find the frequency ranges of UVA and UVB. (b) What are the ranges of the wave numbers for UVA and UVB?

A sinusoidal electromagnetic wave having a magnetic field of amplitude 1.25 mT and a wavelength of 432 nm is traveling in the +x@direction through empty space. (a) What is the frequency of this wave? (b) What is the amplitude of the associated electric field? (c) Write the equations for the electric and magnetic fields as functions of x and t in the form of Eqs. (32.17).

An electromagnetic wave of wavelength 435 nm is traveling in vacuum in the -z@direction. The electric field has amplitude 2.70 * 10-3 V>m and is parallel to the x-axis. What are (a) the frequency and (b) the magnetic-field amplitude? (c) Write the vector equations for E S 1z, t2 and B S 1z, t2.

Consider electromagnetic waves propagating in air. (a) Determine the frequency of a wave with a wavelength of (i) 5.0 km, (ii) 5.0 mm, (iii) 5.0 nm. (b) What is the wavelength (in meters and nanometers) of (i) gamma rays of frequency 6.50 * 1021 Hz and (ii) an AM station radio wave of frequency 590 kHz?

The electric field of a sinusoidal electromagnetic wave obeys the equation E = 1375 V>m2 cos311.99 * 107 rad>m2x + 15.97 * 1015 rad>s2t4. (a) What is the speed of the wave? (b) What are the amplitudes of the electric and magnetic fields of this wave? (c) What are the frequency, wavelength, and period of the wave? Is this light visible to humans?

An electromagnetic wave has an electric field given by E S 1y, t2 = 13.10 * 105 V>m2k n cos3ky - 112.65 * 1012 rad>s2t4. (a) In which direction is the wave traveling? (b) What is the wavelength of the wave? (c) Write the vector equation for B S 1y, t2.

An electromagnetic wave has a magnetic field given by \(\overrightarrow{\boldsymbol{B}}(x, t)=-\left(8.25 \times 10^{-9} \mathrm{~T}\right) \hat{\jmath} \cos \left[\left(1.38 \times 10^4 \mathrm{rad} / \mathrm{m}\right) x+\omega t\right]\). (a) In which direction is the wave traveling? (b) What is the frequency f of the wave? (c) Write the vector equation for \(\overrightarrow{\boldsymbol{E}}(x, t)\).

Radio station WCCO in Minneapolis broadcasts at a frequency of 830 kHz. At a point some distance from the transmitter, the magnetic-field amplitude of the electromagnetic wave from WCCO is 4.82 * 10-11 T. Calculate (a) the wavelength; (b) the wave number; (c) the angular frequency; (d) the electricfield amplitude.

An electromagnetic wave with frequency 65.0 Hz travels in an insulating magnetic material that has dielectric constant 3.64 and relative permeability 5.18 at this frequency. The electric field has amplitude 7.20 * 10-3 V>m. (a) What is the speed of propagation of the wave? (b) What is the wavelength of the wave? (c) What is the amplitude of the magnetic field?

An electromagnetic wave with frequency 5.70 * 1014 Hz propagates with a speed of 2.17 * 108 m>s in a certain piece of glass. Find (a) the wavelength of the wave in the glass; (b) the wavelength of a wave of the same frequency propagating in air; (c) the index of refraction n of the glass for an electromagnetic wave with this frequency; (d) the dielectric constant for glass at this frequency, assuming that the relative permeability is unity.

High-Energy Cancer Treatment. Scientists are working on a new technique to kill cancer cells by zapping them with ultrahigh-energy (in the range of \(10^{12} \ \mathrm W\)) pulses of light that last for an extremely short time (a few nanoseconds). These short pulses scramble the interior of a cell without causing it to explode, as long pulses would do. We can model a typical such cell as a disk \(5.0 \ \mu \mathrm m\) in diameter, with the pulse lasting for 4.0 ns with an average power of \(2.0 \times 10^{12} \ \mathrm W\). We shall assume that the energy is spread uniformly over the faces of 100 cells for each pulse. (a) How much energy is given to the cell during this pulse? (b) What is the intensity (in \(\mathrm {W/m}^2\) ) delivered to the cell? (c) What are the maximum values of the electric and magnetic fields in the pulse?

Fields from a Light Bulb. We can reasonably model a 75-W incandescent light bulb as a sphere 6.0 cm in diameter. Typically, only about 5% of the energy goes to visible light; the rest goes largely to nonvisible infrared radiation. (a) What is the visible-light intensity (in W>m2 ) at the surface of the bulb? (b) What are the amplitudes of the electric and magnetic fields at this surface, for a sinusoidal wave with this intensity?

A sinusoidal electromagnetic wave from a radio station passes perpendicularly through an open window that has area 0.500 m2 . At the window, the electric field of the wave has rms value 0.0400 V>m. How much energy does this wave carry through the window during a 30.0-s commercial?

A space probe \(2.0 \times 10^{10} \ \mathrm m\) from a star measures the total intensity of electromagnetic radiation from the star to be \(5.0 \times 10^3 \ \mathrm{W/m}^2\) . If the star radiates uniformly in all directions, what is its total average power output?

The energy flow to the earth from sunlight is about 1.4 kW>m2 . (a) Find the maximum values of the electric and magnetic fields for a sinusoidal wave of this intensity. (b) The distance from the earth to the sun is about 1.5 * 1011 m. Find the total power radiated by the sun

The intensity of a cylindrical laser beam is 0.800 W>m2 . The cross-sectional area of the beam is 3.0 * 10-4 m2 and the intensity is uniform across the cross section of the beam. (a) What is the average power output of the laser? (b) What is the rms value of the electric field in the beam?

A sinusoidal electromagnetic wave emitted by a cellular phone has a wavelength of 35.4 cm and an electric-field amplitude of 5.40 * 10-2 V>m at a distance of 250 m from the phone. Calculate (a) the frequency of the wave; (b) the magnetic-field amplitude; (c) the intensity of the wave

A monochromatic light source with power output 60.0 W radiates light of wavelength 700 nm uniformly in all directions. Calculate \(E_\mathrm{max}\) and \(B_\mathrm{max}\) for the 700-nm light at a distance of 5.00 m from the source.

Television Broadcasting. Public television station KQED in San Francisco broadcasts a sinusoidal radio signal at a power of 777 kW. Assume that the wave spreads out uniformly into a hemisphere above the ground. At a home 5.00 km away from the antenna, (a) what average pressure does this wave exert on a totally reflecting surface, (b) what are the amplitudes of the electric and magnetic fields of the wave, and (c) what is the average density of the energy this wave carries? (d) For the energy density in part (c), what percentage is due to the electric field and what percentage is due to the magnetic field?

An intense light source radiates uniformly in all directions. At a distance of 5.0 m from the source, the radiation pressure on a perfectly absorbing surface is 9.0 * 10-6 Pa. What is the total average power output of the source?

In the 25-ft Space Simulator facility at NASA’s Jet Propulsion Laboratory, a bank of overhead arc lamps can produce light of intensity \(2500\mathrm{\ W}/\mathrm{m}^2\) at the floor of the facility. (This simulates the intensity of sunlight near the planet Venus.) Find the average radiation pressure (in pascals and in atmospheres) on (a) a totally absorbing section of the floor and (b) a totally reflecting section of the floor. (c) Find the average momentum density (momentum per unit volume) in the light at the floor.

Laser Safety. If the eye receives an average intensity greater than 1.0 * 102 W>m2 , damage to the retina can occur. This quantity is called the damage threshold of the retina. (a) What is the largest average power (in mW) that a laser beam 1.5 mm in diameter can have and still be considered safe to view head-on? (b) What are the maximum values of the electric and magnetic fields for the beam in part (a)? (c) How much energy would the beam in part (a) deliver per second to the retina? (d) Express the damage threshold in W>cm2 .

A laser beam has diameter 1.20 mm. What is the amplitude of the electric field of the electromagnetic radiation in this beam if the beam exerts a force of 3.8 * 10-9 N on a totally reflecting surface?

Laboratory Lasers. He–Ne lasers are often used in physics demonstrations. They produce light of wavelength 633 nm and a power of 0.500 mW spread over a cylindrical beam 1.00 mm in diameter (although these quantities can vary). (a) What is the intensity of this laser beam? (b) What are the maximum values of the electric and magnetic fields? (c) What is the average energy density in the laser beam?

A standing electromagnetic wave in a certain material has frequency 2.20 * 1010 Hz. The nodal planes of B S are 4.65 mm apart. Find (a) the wavelength of the wave in this material; (b) the distance between adjacent nodal planes of the E S field; (c) the speed of propagation of the wave.

Microwave Oven. The microwaves in a certain microwave oven have a wavelength of 12.2 cm. (a) How wide must this oven be so that it will contain five antinodal planes of the electric field along its width in the standing-wave pattern? (b) What is the frequency of these microwaves? (c) Suppose a manufacturing error occurred and the oven was made 5.0 cm longer than specified in part (a). In this case, what would have to be the frequency of the microwaves for there still to be five antinodal planes of the electric field along the width of the oven?

An electromagnetic standing wave in air has frequency 75.0 MHz. (a) What is the distance between nodal planes of the E S field? (b) What is the distance between a nodal plane of E S and the closest nodal plane of B S ?

Laser Surgery. Very short pulses of high-intensity laser beams are used to repair detached portions of the retina of the eye. The brief pulses of energy absorbed by the retina weld the detached portions back into place. In one such procedure, a laser beam has a wavelength of 810 nm and delivers 250 mW of power spread over a circular spot 510 mm in diameter. The vitreous humor (the transparent fluid that fills most of the eye) has an index of refraction of 1.34. (a) If the laser pulses are each 1.50 ms long, how much energy is delivered to the retina with each pulse? (b) What average pressure would the pulse of the laser beam exert at normal incidence on a surface in air if the beam is fully absorbed? (c) What are the wavelength and frequency of the laser light inside the vitreous humor of the eye? (d) What are the maximum values of the electric and magnetic fields in the laser beam?

Consider a sinusoidal electromagnetic wave with fields E S = Emaxne cos1kx - vt2 and B S = Bmaxk n cos1kx - vt + f2, with -p f p. Show that if E S and B S are to satisfy Eqs. (32.12) and (32.14), then Emax = cBmax and f = 0. (The result f = 0 means the E S and B S fields oscillate in phase.)

A satellite 575 km above the earths surface transmits sinusoidal electromagnetic waves of frequency 92.4 MHz uniformly in all directions, with a power of 25.0 kW. (a) What is the intensity of these waves as they reach a receiver at the surface of the earth directly below the satellite? (b) What are the amplitudes of the electric and magnetic fields at the receiver? (c) If the receiver has a totally absorbing panel measuring 15.0 cm by 40.0 cm oriented with its plane perpendicular to the direction the waves travel, what average force do these waves exert on the panel? Is this force large enough to cause significant effects?

For a sinusoidal electromagnetic wave in vacuum, such as that described by Eq. (32.16), show that the average energy density in the electric field is the same as that in the magnetic field.

The sun emits energy in the form of electromagnetic waves at a rate of 3.9 * 1026 W. This energy is produced by nuclear reactions deep in the suns interior. (a) Find the intensity of electromagnetic radiation and the radiation pressure on an absorbing object at the surface of the sun (radius r = R = 6.96 * 105 km) and at r = R>2, in the suns interior. Ignore any scattering of the waves as they move radially outward from the center of the sun. Compare to the values given in Section 32.4 for sunlight just before it enters the earths atmosphere. (b) The gas pressure at the suns surface is about 1.0 * 104 Pa; at r = R>2, the gas pressure is calculated from solar models to be about 4.7 * 1013 Pa. Comparing with your results in part (a), would you expect that radiation pressure is an important factor in determining the structure of the sun? Why or why not?

A small heliumneon laser emits red visible light with a power of 5.80 mW in a beam of diameter 2.50 mm. (a) What are the amplitudes of the electric and magnetic fields of this light? (b) What are the average energy densities associated with the electric field and with the magnetic field? (c) What is the total energy contained in a 1.00-m length of the beam?

Two square reflectors, each 1.50 cm on a side and of mass 4.00 g, are located at opposite ends of a thin, extremely light, 1.00-m rod that can rotate without friction and in vacuum about an axle perpendicular to it through its center (Fig. P32.39). These reflectors are small enough to be treated as point masses in moment-of-inertia calculations. Both reflectors are illuminated on one face by a sinusoidal light wave having an electric field of amplitude 1.25 N/C that falls uniformly on both surfaces and always strikes them perpendicular to the plane of their surfaces. One reflector is covered with a perfectly absorbing coating, and the other is covered with a perfectly reflecting coating. What is the angular acceleration of this device?

A source of sinusoidal electromagnetic waves radiates uniformly in all directions. At a distance of 10.0 m from this source, the amplitude of the electric field is measured to be 3.50 N>C. What is the electric-field amplitude 20.0 cm from the source?

A cylindrical conductor with a circular cross section has a radius a and a resistivity r and carries a constant current I. (a) What are the magnitude and direction of the electricfield vector E S at a point just inside the wire at a distance a from the axis? (b) What are the magnitude and direction of the magneticfield vector B S at the same point? (c) What are the magnitude and direction of the Poynting vector S S at the same point? (The direction of S S is the direction in which electromagnetic energy flows into or out of the conductor.) (d) Use the result in part (c) to find the rate of flow of energy into the volume occupied by a length l of the conductor. (Hint: Integrate S S over the surface of this volume.) Compare your result to the rate of generation of thermal energy in the same volume. Discuss why the energy dissipated in a currentcarrying conductor, due to its resistance, can be thought of as entering through the cylindrical sides of the conductor

A circular wire loop has a radius of 7.50 cm. A sinusoidal electromagnetic plane wave traveling in air passes through the loop, with the direction of the magnetic field of the wave perpendicular to the plane of the loop. The intensity of the wave at the location of the loop is 0.0275 W>m2 , and the wavelength of the wave is 6.90 m. What is the maximum emf induced in the loop?

In a certain experiment, a radio transmitter emits sinusoidal electromagnetic waves of frequency 110.0 MHz in opposite directions inside a narrow cavity with reflectors at both ends, causing a standing-wave pattern to occur. (a) How far apart are the nodal planes of the magnetic field? (b) If the standing-wave pattern is determined to be in its eighth harmonic, how long is the cavity?

The 19th-century inventor Nikola Tesla proposed to transmit electric power via sinusoidal electromagnetic waves. Suppose power is to be transmitted in a beam of cross-sectional area 100 m2 . What electric- and magnetic-field amplitudes are required to transmit an amount of power comparable to that handled by modern transmission lines (that carry voltages and currents of the order of 500 kV and 1000 A)?

Global Positioning System (GPS). The GPS network consists of 24 satellites, each of which makes two orbits around the earth per day. Each satellite transmits a 50.0-W (or even less) sinusoidal electromagnetic signal at two frequencies, one of which is 1575.42 MHz. Assume that a satellite transmits half of its power at each frequency and that the waves travel uniformly in a downward hemisphere. (a) What average intensity does a GPS receiver on the ground, directly below the satellite, receive? (Hint: First use Newtons laws to find the altitude of the satellite.) (b) What are the amplitudes of the electric and magnetic fields at the GPS receiver in part (a), and how long does it take the signal to reach the receiver? (c) If the receiver is a square panel 1.50 cm on a side that absorbs all of the beam, what average pressure does the signal exert on it? (d) What wavelength must the receiver be tuned to?

Solar Sail. NASA is giving serious consideration to the concept of solar sailing. A solar sailcraft uses a large, lowmass sail and the energy and momentum of sunlight for propulsion. (a) Should the sail be absorbing or reflective? Why? (b) The total power output of the sun is 3.9 * 1026 W. How large a sail is necessary to propel a 10,000-kg spacecraft against the gravitational force of the sun? Express your result in square kilometers. (c) Explain why your answer to part (b) is independent of the distance from the sun.

Interplanetary space contains many small particles referred to as interplanetary dust. Radiation pressure from the sun sets a lower limit on the size of such dust particles. To see the origin of this limit, consider a spherical dust particle of radius R and mass density r. (a) Write an expression for the gravitational force exerted on this particle by the sun (mass M) when the particle is a distance r from the sun. (b) Let L represent the luminosity of the sun, equal to the rate at which it emits energy in electromagnetic radiation. Find the force exerted on the (totally absorbing) particle due to solar radiation pressure, remembering that the intensity of the suns radiation also depends on the distance r. The relevant area is the cross-sectional area of the particle, not the total surface area of the particle. As part of your answer, explain why this is so. (c) The mass density of a typical interplanetary dust particle is about 3000 kg>m3 . Find the particle radius R such that the gravitational and radiation forces acting on the particle are equal in magnitude. The luminosity of the sun is 3.9 * 1026 W. Does your answer depend on the distance of the particle from the sun? Why or why not? (d) Explain why dust particles with a radius less than that found in part (c) are unlikely to be found in the solar system. [Hint: Construct the ratio of the two force expressions found in parts (a) and (b).]

The company where you work has obtained and stored five lasers in a supply room. You have been asked to determine the intensity of the electromagnetic radiation produced by each laser. The lasers are marked with specifications, but unfortunately different information is given for each laser: Laser A: power = 2.6 W; diameter of cylindrical beam = 2.6 mm Laser B: amplitude of electric field = 480 V>m Laser C: amplitude of magnetic field = 8.7 * 10-6 T Laser D: diameter of cylindrical beam = 1.8 mm; force on totally reflecting surface = 6.0 * 10-8 N Laser E: average energy density in beam = 3.0 * 10-7 J>m3 Calculate the intensity for each laser, and rank the lasers in order of increasing intensity. Assume that the laser beams have uniform intensity distributions over their cross sections.

Because the speed of light in vacuum (or air) has such a large value, it is very difficult to measure directly. To measure this speed, you conduct an experiment in which you measure the amplitude of the electric field in a laser beam as you change the intensity of the beam. Figure P32.49 is a graph of the intensity I that you measured versus the square of the amplitude Emax of the electric field. The best-fit straight line for your data has a slope of 1.33 * 10-3 J>1V2 # s2. (a) Explain why the data points plotted this way lie close to a straight line. (b) Use this graph to calculate the speed of light in air.

As a physics lab instructor, you conduct an experiment on standing waves of microwaves, similar to the standing waves produced in a microwave oven. A transmitter emits microwaves of frequency f . The waves are reflected by a flat metal reflector, and a receiver measures the waves electric-field amplitude as a function of position in the standing-wave pattern that is produced between the transmitter and reflector (Fig. P32.50). You measure the distance d between points of maximum amplitude (antinodes) of the electric field as a function of the frequency of the waves emitted by the transmitter. You obtain the data given in the table. f 1109 Hz2 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 8.0 d 1cm2 15.2 9.7 7.7 5.8 5.2 4.1 3.8 3.1 2.3 1.7 Use the data to calculate c, the speed of the electromagnetic waves in air. Because each measured value has some experimental error, plot the data in such a way that the data points will lie close to a straight line, and use the slope of that straight line to calculate c.

Electromagnetic radiation is emitted by accelerating charges. The rate at which energy is emitted from an accelerating charge that has charge q and acceleration a is given by dE dt = q2 a2 6pP0c3 where c is the speed of light. (a) Verify that this equation is dimensionally correct. (b) If a proton with a kinetic energy of 6.0 MeV is traveling in a particle accelerator in a circular orbit of radius 0.750 m, what fraction of its energy does it radiate per second? (c) Consider an electron orbiting with the same speed and radius. What fraction of its energy does it radiate per second?

The Classical Hydrogen Atom. The electron in a hydrogen atom can be considered to be in a circular orbit with a radius of 0.0529 nm and a kinetic energy of 13.6 eV. If the electron behaved classically, how much energy would it radiate per second (see Challenge Problem 32.51)? What does this tell you about the use of classical physics in describing the atom?

Electromagnetic waves propagate much differently in conductors than they do in dielectrics or in vacuum. If the resistivity of the conductor is sufficiently low (that is, if it is a sufficiently good conductor), the oscillating electric field of the wave gives rise to an oscillating conduction current that is much larger than the displacement current. In this case, the wave equation for an electric field E S 1x, t2 = Ey1x, t2ne propagating in the +x@direction within a conductor is 0 2 Ey1x, t2 0x2 = m r 0Ey1x, t2 0t where m is the permeability of the conductor and r is its resistivity. (a) A solution to this wave equation is Ey1x, t2 = Emaxe-kC x cos1kCx - vt2, where kC = 1vm>2r. Verify this by substituting Ey1x, t2 into the above wave equation. (b) The exponential term shows that the electric field decreases in amplitude as it propagates. Explain why this happens. (Hint: The field does work to move charges within the conductor. The current of these moving charges causes i 2 R heating within the conductor, raising its temperature. Where does the energy to do this come from?) (c) Show that the electric-field amplitude decreases by a factor of 1>e in a distance 1>kC = 12r>vm, and calculate this distance for a radio wave with frequency f = 1.0 MHz in copper (resistivity 1.72 * 10-8 # m; permeability m = m0). Since this distance is so short, electromagnetic waves of this frequency can hardly propagate at all into copper. Instead, they are reflected at the surface of the metal. This is why radio waves cannot penetrate through copper or other metals, and why radio reception is poor inside a metal structure.

In the United States, household electrical power is provided at a frequency of 60 Hz, so electromagnetic radiation at that frequency is of particular interest. On the basis of the ICNIRP guidelines, what is the maximum intensity of an electromagnetic wave at this frequency to which the general public should be exposed? (a) 7.7 W>m2 ; (b) 160 W>m2 ; (c) 45 kW>m2 ; (d) 260 kW>m2 .

Doubling the frequency of a wave in the range of 25 Hz to 3 kHz represents what change in the maximum allowed electromagnetic-wave intensity? (a) A factor of 2; (b) a factor of 1>12; (c) a factor of 1 2 ; (d) a factor of 1 4 .

The ICNIRP also has guidelines for magnetic-field exposure for the general public. In the frequency range of 25 Hz to 3 kHz, this guideline states that the maximum allowed magneticfield amplitude is 5>f T, where f is the frequency in kHz. Which is a more stringent limit on allowable electromagnetic-wave intensity in this frequency range: the electric-field guideline or the magnetic-field guideline? (a) The magnetic-field guideline, because at a given frequency the allowed magnetic field is smaller than the allowed electric field. (b) The electric field guideline, because at a given frequency the allowed intensity calculated from the electric-field guideline is smaller. (c) It depends on the particular frequency chosen (both guidelines are frequency dependent). (d) Neitherfor any given frequency, the guidelines represent the same electromagnetic-wave intensity.