Solved: A building in San Francisco has light fixtures

(a) Music. When a person sings, his or her vocal cords vibrate in a repetitive pattern that has the same frequency as the note that is sung. If someone sings the note B flat, which has a frequency of 466 Hz, how much time does it take the persons vocal cords to vibrate through one complete cycle, and what is the angular frequency of the cords? (b) Hearing. When sound waves strike the eardrum, this membrane vibrates with the same frequency as the sound. The highest pitch that typical humans can hear has a period of What are the frequency and angular frequency of the vibrating eardrum for this sound? (c) Vision. When light having vibrations with angular frequency ranging from to strikes the retina of the eye, it stimulates the receptor cells there and is perceived as visible light. What are the limits of the period and frequency of this light? (d) Ultrasound. High-frequency sound waves (ultrasound) are used to probe the interior of the body, much as x rays do. To detect small objects such as tumors, a frequency of around 5.0 MHz is used. What are the period and angular frequency of the molecular vibrations caused by this pulse of sound?

If an object on a horizontal, frictionless surface is attached to a spring, displaced, and then released, it will oscillate. If it is displaced 0.120 m from its equilibrium position and released with zero initial speed, then after 0.800 s its displacement is found to be 0.120 m on the opposite side, and it has passed the equilibrium position once during this interval. Find (a) the amplitude; (b) the period; (c) the frequency.

The tip of a tuning fork goes through 440 complete vibrations in 0.500 s. Find the angular frequency and the period of the motion.

The displacement of an oscillating object as a function of time is shown in Fig. E14.4. What are (a) the frequency; (b) the amplitude; (c) the period; (d) the angular frequency of this motion?

A machine part is undergoing SHM with a frequency of 5.00 Hz and amplitude 1.80 cm. How long does it take the part to go from \(x=0 \text{ to } x=-1.80 \mathrm{\ cm}\)? Text Transcription: x = 0 to x = -1.80 cm

In a physics lab, you attach a 0.200-kg air-track glider to the end of an ideal spring of negligible mass and start it oscillating. The elapsed time from when the glider first moves through the equilibrium point to the second time it moves through that point is 2.60 s. Find the springs force constant.

When a body of unknown mass is attached to an ideal spring with force constant it is found to vibrate with a frequency of 6.00 Hz. Find (a) the period of the motion; (b) the angular frequency; (c) the mass of the body

When a 0.750-kg mass oscillates on an ideal spring, the frequency is 1.33 Hz. What will the frequency be if 0.220 kg are (a) added to the original mass and (b) subtracted from the original mass? Try to solve this problem without finding the force constant of the spring.

An object is undergoing SHM with period 0.900 s and amplitude 0.320 m. At t = 0 the object is at x = 0.320 m and is instantaneously at rest. Calculate the time it takes the object to go (a) from x = 0.320 m to x = 0.160 m and (b) from to x = 0.

A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. When the block is at x = 0.280 m, the acceleration of the block is \(-5.30 \mathrm{~m} / \mathrm{s}^{2}\). What is the frequency of the motion?

A 2.00-kg, frictionless block is attached to an ideal spring with force constant At the spring is neither stretched nor compressed and the block is moving in the negative direction at Find (a) the amplitude and (b) the phase angle. (c) Write an equation for the position as a function of time.

Repeat Exercise 14.11, but assume that at the block has velocity and displacement

The point of the needle of a sewing machine moves in SHM along the x-axis with a frequency of 2.5 Hz. At its position and velocity components are cm and respectively. (a) Find the acceleration component of the needle at (b) Write equations giving the position, velocity, and acceleration components of the point as a function of time.

A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. When the amplitude of the motion is 0.090 m, it takes the block 2.70 s to travel from to . If the amplitude is doubled, to 0.180 m, how long does it take the block to travel (a) from to and (b) from to ?

Weighing Astronauts. This procedure has actually been used to “weigh” astronauts in space. A 42.5-kg chair is attached to a spring and allowed to oscillate. When it is empty, the chair takes 1.30 s to make one complete vibration. But with an astronaut sitting in it, with her feet off the floor, the chair takes 2.54 s for one cycle. What is the mass of the astronaut?

A 0.400-kg object undergoing SHM has when What is the time for one oscillation?

On a frictionless, horizontal air track, a glider oscillates at the end of an ideal spring of force constant The graph in Fig. E14.17 shows the acceleration of the glider as a function of time. Find (a) the mass of the glider; (b) the maximum displacement of the glider from the equilibrium point; (c) the maximum force the spring exerts on the glider.

A 0.500-kg mass on a spring has velocity as a function of time given by \(v_x(t)=-(3.60\mathrm{\ cm}/\mathrm{s})\sin\left[\left(4.71\mathrm{\ s}^{-1}\right)t-\pi/2\right]\). What are (a) the period; (b) the amplitude; (c) the maximum acceleration of the mass; (d) the force constant of the spring?

A 1.50-kg mass on a spring has displacement as a function of time given by the equation \(x(t)=(7.40\mathrm{\ cm})\cos\left[\left(4.16\mathrm{\ s}^{-1}\right)t-2.42\right]\) Find (a) the time for one complete vibration; (b) the force constant of the spring; (c) the maximum speed of the mass; (d) the maximum force on the mass; (e) the position, speed, and acceleration of the mass at t = 1.00 s; (f) the force on the mass at that time.

In February 2004, scientists at Purdue University used a highly sensitive technique to measure the mass of a vaccinia virus (the kind used in smallpox vaccine). The procedure involved measuring the frequency of oscillation of a tiny sliver of silicon (just 30 nm long) with a laser, first without the virus and then after the virus had attached itself to the silicon. The difference in mass caused a change in the frequency. We can model such a process as a mass on a spring. (a) Show that the ratio of the frequency with the virus attached to the frequency without the virus S is given by the formula , where mV is the mass of the virus and mS is the mass of the silicon sliver. Notice that it is not necessary to know or measure the force constant of the spring. (b) In some data, the silicon sliver has a mass of and a frequency of without the virus and with the virus. What is the mass of the virus, in grams and in femtograms?

A guitar string vibrates at a frequency of 440 Hz. A point at its center moves in SHM with an amplitude of 3.0 mm and a phase angle of zero. (a) Write an equation for the position of the center of the string as a function of time. (b) What are the maximum values of the magnitudes of the velocity and acceleration of the center of the string? (c) The derivative of the acceleration with respect to time is a quantity called the jerk. Write an equation for the jerk of the center of the string as a function of time, and find the maximum value of the magnitude of the jerk

For the oscillating object in Fig. E14.4, what are (a) its maximum speed and (b) its maximum acceleration?

A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. The amplitude of the motion is 0.120 m. The maximum speed of the block is 3.90 m s. What is the maximum magnitude of the acceleration of the block?

A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. The amplitude of the motion is 0.250 m and the period is 3.20 s. What are the speed and acceleration of the block when ?

A tuning fork labeled 392 Hz has the tip of each of its two prongs vibrating with an amplitude of 0.600 mm. (a) What is the maximum speed of the tip of a prong? (b) A housefly (Musca domestica) with mass 0.0270 g is holding onto the tip of one of the prongs. As the prong vibrates, what is the flys maximum kinetic energy? Assume that the flys mass has a negligible effect on the frequency of oscillation

A harmonic oscillator has angular frequency and amplitude A. (a) What are the magnitudes of the displacement and velocity when the elastic potential energy is equal to the kinetic energy? (Assume that at equilibrium.) (b) How often does this occur in each cycle? What is the time between occurrences? (c) At an instant when the displacement is equal to what fraction of the total energy of the system is kinetic and what fraction is potential?

A 0.500-kg glider, attached to the end of an ideal spring with force constant undergoes SHM with an amplitude of 0.040 m. Compute (a) the maximum speed of the glider; (b) the speed of the glider when it is at (c) the magnitude of the maximum acceleration of the glider; (d) the acceleration of the glider at (e) the total mechanical energy of the glider at any point in its motion

A cheerleader waves her pom-pom in SHM with an amplitude of 18.0 cm and a frequency of 0.850 Hz. Find (a) the maximum magnitude of the acceleration and of the velocity; (b) the acceleration and speed when the pom-poms coordinate is (c) the time required to move from the equilibrium position directly to a point 12.0 cm away. (d) Which of the quantities asked for in parts (a), (b), and (c) can be found using the energy approach used in Section 14.3, and which cannot? Explain.

For the situation described in part (a) of Example 14.5, what should be the value of the putty mass m so that the amplitude after the collision is one-half the original amplitude? For this value of m, what fraction of the original mechanical energy is converted into heat?

A 0.150-kg toy is undergoing SHM on the end of a horizontal spring with force constant When the object is 0.0120 m from its equilibrium position, it is observed to have a speed of What are (a) the total energy of the object at any point of its motion; (b) the amplitude of the motion; (c) the maximum speed attained by the object during its motion?

You are watching an object that is moving in SHM. When the object is displaced 0.600 m to the right of its equilibrium position, it has a velocity of 2.20 m/s to the right and an acceleration of \(8.40\mathrm{\ m}/\mathrm{s}^2\) to the left. How much farther from this point will the object move before it stops momentarily and then starts to move back to the left?

On a horizontal, frictionless table, an open-topped 5.20-kg box is attached to an ideal horizontal spring having force constant Inside the box is a 3.44-kg stone. The system is oscillating with an amplitude of 7.50 cm. When the box has reached its maximum speed, the stone is suddenly plucked vertically out of the box without touching the box. Find (a) the period and (b) the amplitude of the resulting motion of the box. (c) Without doing any calculations, is the new period greater or smaller than the original period? How do you know?

A mass is oscillating with amplitude A at the end of a spring. How far (in terms of A) is this mass from the equilibrium position of the spring when the elastic potential energy equals the kinetic energy?

A mass m is attached to a spring of force constant 75 N m and allowed to oscillate. Figure E14.34 shows a graph of its velocity as a function of time t. Find (a) the period, (b) the frequency, and (c) the angular frequency of this motion. (d) What is the amplitude (in cm), and at what times does the mass reach this position? (e) Find the maximum acceleration of the mass and the times at which it occurs. (f) What is the mass m?

Inside a NASA test vehicle, a 3.50-kg ball is pulled along by a horizontal ideal spring fixed to a friction-free table. The force constant of the spring is 225 N/m. The vehicle has a steady acceleration of \(5.00\mathrm{\ m}/\mathrm{s}^2\), and the ball is not oscillating. Suddenly, when the vehicle's speed has reached 45.0 m/s, its engines turn off, thus eliminating its acceleration but not its velocity. Find (a) the amplitude and (b) the frequency of the resulting oscillations of the ball. (c) What will be the ball's maximum speed relative to the vehicle?

A proud deep-sea fisherman hangs a 65.0-kg fish from an ideal spring having negligible mass. The fish stretches the spring 0.120 m. (a) Find the force constant of the spring. The fish is now pulled down 5.00 cm and released. (b) What is the period of oscillation of the fish? (c) What is the maximum speed it will reach?

A 175-g glider on a horizontal, frictionless air track is attached to a fixed ideal spring with force constant 155 N/m. At the instant you make measurements on the glider, it is moving at 0.815 m/s and is 3.00 cm from its equilibrium point. Use energy conservation to find (a) the amplitude of the motion and (b) the maximum speed of the glider. (c) What is the angular frequency of the oscillations?

A thrill-seeking cat with mass 4.00 kg is attached by a harness to an ideal spring of negligible mass and oscillates vertically in SHM. The amplitude is 0.050 m, and at the highest point of the motion the spring has its natural unstretched length. Calculate the elastic potential energy of the spring (take it to be zero for the unstretched spring), the kinetic energy of the cat, the gravitational potential energy of the system relative to the lowest point of the motion, and the sum of these three energies when the cat is (a) at its highest point; (b) at its lowest point; (c) at its equilibrium position.

A 1.50-kg ball and a 2.00-kg ball are glued together with the lighter one below the heavier one. The upper ball is attached to a vertical ideal spring of force constant 165 N/m, and the system is vibrating vertically with amplitude 15.0 cm. The glue connecting the balls is old and weak, and it suddenly comes loose when the balls are at the lowest position in their motion. (a) Why is the glue more likely to fail at the lowest point than at any other point in the motion? (b) Find the amplitude and frequency of the vibrations after the lower ball has come loose.

A uniform, solid metal disk of mass 6.50 kg and diameter 24.0 cm hangs in a horizontal plane, supported at its center by a vertical metal wire. You find that it requires a horizontal force of 4.23 N tangent to the rim of the disk to turn it by thus twisting the wire. You now remove this force and release the disk from rest. (a) What is the torsion constant for the metal wire? (b) What are the frequency and period of the torsional oscillations of the disk? (c) Write the equation of motion for for the disk.

A certain alarm clock ticks four times each second, with each tick representing half a period. The balance wheel consists of a thin rim with radius 0.55 cm, connected to the balance staff by thin spokes of negligible mass. The total mass of the balance wheel is 0.90 g. (a) What is the moment of inertia of the balance wheel about its shaft? (b) What is the torsion constant of the coil spring (Fig. 14.19)?

A thin metal disk with mass and radius 2.20 cm is attached at its center to a long fiber (Fig. E14.42). The disk, when twisted and released, oscillates with a period of 1.00 s. Find the torsion constant of the fiber

You want to find the moment of inertia of a complicated machine part about an axis through its center of mass. You suspend it from a wire along this axis. The wire has a torsion constant of . You twist the part a small amount about this axis and let it go, timing 125 oscillations in 265 s. What is the moment of inertia you want to find?

The balance wheel of a watch vibrates with an angular amplitude angular frequency and phase angle (a) Find expressions for the angular velocity and angular acceleration as functions of time. (b) Find the balance wheels angular velocity and angular acceleration when its angular displacement is and when its angular displacement is and is decreasing. (Hint: Sketch a graph of versus t.)

You pull a simple pendulum 0.240 m long to the side through an angle of and release it. (a) How much time does it take the pendulum bob to reach its highest speed? (b) How much time does it take if the pendulum is released at an angle of instead of

An 85.0-kg mountain climber plans to swing down, starting from rest, from a ledge using a light rope 6.50 m long. He holds one end of the rope, and the other end is tied higher up on a rock face. Since the ledge is not very far from the rock face, the rope makes a small angle with the vertical. At the lowest point of his swing, he plans to let go and drop a short distance to the ground. (a) How long after he begins his swing will the climber first reach his lowest point? (b) If he missed the first chance to drop off, how long after first beginning his swing will the climber reach his lowest point for the second time?

A building in San Francisco has light fixtures consisting of small 2.35-kg bulbs with shades hanging from the ceiling at the end of light, thin cords 1.50 m long. If a minor earthquake occurs, how many swings per second will these fixtures make?

A certain simple pendulum has a period on the earth of 1.60 s. What is its period on the surface of Mars, where

After landing on an unfamiliar planet, a space explorer constructs a simple pendulum of length 50.0 cm. She finds that the pendulum makes 100 complete swings in 136 s. What is the value of g on this planet?

A small sphere with mass m is attached to a massless rod of length L that is pivoted at the top, forming a simple pendulum. The pendulum is pulled to one side so that the rod is at an angle from the vertical, and released from rest. (a) In a diagram, show the pendulum just after it is released. Draw vectors representing the forces acting on the small sphere and the acceleration of the sphere. Accuracy counts! At this point, what is the linear acceleration of the sphere? (b) Repeat part (a) for the instant when the pendulum rod is at an angle from the vertical. (c) Repeat part (a) for the instant when the pendulum rod is vertical. At this point, what is the linear speed of the sphere?

A simple pendulum 2.00 m long swings through a maximum angle of with the vertical. Calculate its period (a) assuming a small amplitude, and (b) using the first three terms of Eq. (14.35). (c) Which of the answers in parts (a) and (b) is more accurate? For the one that is less accurate, by what percent is it in error from the more accurate answer?

We want to hang a thin hoop on a horizontal nail and have the hoop make one complete small-angle oscillation each 2.0 s. What must the hoop's radius be?

A 1.80-kg connecting rod from a car engine is pivoted about a horizontal knife edge as shown in Fig. E14.53. The center of gravity of the rod was located by balancing and is 0.200 m from the pivot. When the rod is set into small-amplitude oscillation, it makes 100 complete swings in 120 s. Calculate the moment of inertia of the rod about the rotation axis through the pivot.

A 1.80-kg monkey wrench is pivoted 0.250 m from its center of mass and allowed to swing as a physical pendulum. The period for small-angle oscillations is 0.940 s. (a) What is the moment of inertia of the wrench about an axis through the pivot? (b) If the wrench is initially displaced 0.400 rad from its equilibrium position, what is the angular speed of the wrench as it passes through the equilibrium position?

Two pendulums have the same dimensions (length L) and total mass Pendulum A is a very small ball swinging at the end of a uniform massless bar. In pendulum B, half the mass is in the ball and half is in the uniform bar. Find the period of each pendulum for small oscillations. Which one takes longer for a swing?

A holiday ornament in the shape of a hollow sphere with mass M = 0.015 kg and radius R = 0.050 m is hung from a tree limb by a small loop of wire attached to the surface of the sphere. If the ornament is displaced a small distance and released, it swings back and forth as a physical pendulum with negligible friction. Calculate its period. (Hint: Use the parallel-axis theorem to find the moment of inertia of the sphere about the pivot at the tree limb.)

The two pendulums shown in Fig. E14.57 each consist of a uniform solid ball of mass M supported by a rigid massless rod, but the ball for pendulum A is very tiny while the ball for pendulum B is much larger. Find the period of each pendulum for small displacements. Which ball takes longer to complete a swing?

A 2.50-kg rock is attached at the end of a thin, very light rope 1.45 m long. You start it swinging by releasing it when the rope makes an 11 angle with the vertical. You record the observation that it rises only to an angle of 4.5 with the vertical after swings. (a) How much energy has this system lost during that time? (b) What happened to the lost energy? Explain how it could have been lost.

. An unhappy 0.300-kg rodent, moving on the end of a spring with force constant is acted on by a damping force (a) If the constant b has the value what is the frequency of oscillation of the rodent? (b) For what value of the constant b will the motion be critically damped?

A 50.0-g hard-boiled egg moves on the end of a spring with force constant Its initial displacement is 0.300 m. A damping force acts on the egg, and the amplitude of the motion decreases to 0.100 m in 5.00 s. Calculate the magnitude of the damping constant b.

The motion of an underdamped oscillator is described by Eq. (14.42). Let the phase angle be zero. (a) According to this equation, what is the value of x at (b) What are the magnitude and direction of the velocity at What does the result tell you about the slope of the graph of x versus t near (c) Obtain an expression for the acceleration at For what value or range of values of the damping constant b (in terms of k and m) is the acceleration at negative, zero, and positive? Discuss each case in terms of the shape of the graph of x versus t near t = 0.

A mass is vibrating at the end of a spring of force constant 225 N/m. Figure E14.62 shows a graph of its position x as a function of time t. (a) At what times is the mass not moving? (b) How much energy did this system originally contain? (c) How much energy did the system lose between t = 1.0 s and t = 4.0 s? Where did this energy go?

A sinusoidally varying driving force is applied to a damped harmonic oscillator. (a) What are the units of the damping constant b? (b) Show that the quantity has the same units as b. (c) In terms of and k, what is the amplitude for when (i) and (ii) Compare your results to Fig. 14.28.

A sinusoidally varying driving force is applied to a damped harmonic oscillator of force constant k and mass m. If the damping constant has a value \(b_{1}\) the amplitude is \(A_{1}\) when the driving angular frequency equals \(\sqrt{k / m}\). In terms of \(A_{1}\), what is the amplitude for the same driving frequency and the same driving force amplitude \(F_{\text {max }}\), if the damping constant is (a) \(3 b_{1}\) and (b) \(b_{1} / 2\)?

An object is undergoing SHM with period 1.200 s and amplitude 0.600 m. At the object is at and is moving in the negative x-direction. How far is the object from the equilibrium position when

An object is undergoing SHM with period 0.300 s and amplitude 6.00 cm. At the object is instantaneously at rest at Calculate the time it takes the object to go from x = 6.00 cm to x = -1.50 cm

The motion of the piston of an automobile engine is approximately simple harmonic. (a) If the stroke of an engine (twice the amplitude) is 0.100 m and the engine runs at compute the acceleration of the piston at the endpoint of its stroke. (b) If the piston has mass 0.450 kg, what net force must be exerted on it at this point? (c) What are the speed and kinetic energy of the piston at the midpoint of its stroke? (d) What average power is required to accelerate the piston from rest to the speed found in part (c)? (e) If the engine runs at what are the answers to parts (b), (c), and (d)?

Four passengers with combined mass 250 kg compress the springs of a car with worn-out shock absorbers by 4.00 cm when they get in. Model the car and passengers as a single body on a single ideal spring. If the loaded car has a period of vibration of 1.92 s, what is the period of vibration of the empty car?

A glider is oscillating in SHM on an air track with an amplitude \(A_{1}\). You slow it so that its amplitude is halved. What happens to its (a) period, frequency, and angular frequency; (b) total mechanical energy; (c) maximum speed; (d) speed at \(x=\pm A_{1} / 4\); (e) potential and kinetic energies at \(x=\pm A_{1} / 4\)?

A child with poor table manners is sliding his dinner plate back and forth in SHM with an amplitude of 0.100 m on a horizontal surface. At a point 0.060 m away from equilibrium, the speed of the plate is (a) What is the period? (b) What is the displacement when the speed is (c) In the center of the dinner plate is a 10.0-g carrot slice. If the carrot slice is just on the verge of slipping at the endpoint of the path, what is the coefficient of static friction between the carrot slice and the plate?

A 1.50-kg, horizontal, uniform tray is attached to a vertical ideal spring of force constant and a 275-g metal ball is in the tray. The spring is below the tray, so it can oscillate up and down. The tray is then pushed down to point A, which is 15.0 cm below the equilibrium point, and released from rest. (a) How high above point A will the tray be when the metal ball leaves the tray? (Hint: This does not occur when the ball and tray reach their maximum speeds.) (b) How much time elapses between releasing the system at point A and the ball leaving the tray? (c) How fast is the ball moving just as it leaves the tray?

A block with mass M rests on a frictionless surface and is connected to a horizontal spring of force constant k. The other end of the spring is attached to a wall (Fig. P14.72). A second block with mass m rests on top of the first block. The coefficient of static friction between the blocks is Find the maximum amplitude of oscillation such that the top block will not slip on the bottom block.

A 10.0-kg mass is traveling to the right with a speed of on a smooth horizontal surface when it collides with and sticks to a second mass that is initially at rest but is attached to a light spring with force constant (a) Find the frequency, amplitude, and period of the subsequent oscillations. (b) How long does it take the system to return the first time to the position it had immediately after the collision?

A rocket is accelerating upward at \(4.00\mathrm{\ m}/\mathrm{s}^2\) from the launchpad on the earth. Inside a small, 1.50-kg ball hangs from the ceiling by a light, 1.10-m wire. If the ball is displaced \(8.50^{\circ}\) from the vertical and released, find the amplitude and period of the resulting swings of this pendulum.

An apple weighs 1.00 N. When you hang it from the end of a long spring of force constant and negligible mass, it bounces up and down in SHM. If you stop the bouncing and let the apple swing from side to side through a small angle, the frequency of this simple pendulum is half the bounce frequency. (Because the angle is small, the back-and-forth swings do not cause any appreciable change in the length of the spring.) What is the unstretched length of the spring (with the apple removed)?

An object with height h, mass M, and a uniform cross-sectional area A floats upright in a liquid with density (a) Calculate the vertical distance from the surface of the liquid to the bottom of the floating object at equilibrium. (b) A downward force with magnitude F is applied to the top of the object. At the new equilibrium position, how much farther below the surface of the liquid is the bottom of the object than it was in part (a)? (Assume that some of the object remains above the surface of the liquid.) (c) Your result in part (b) shows that if the force is suddenly removed, the object will oscillate up and down in SHM. Calculate the period of this motion in terms of the density of the liquid, the mass M, and the crosssectional area A of the object. You can ignore the damping due to fluid friction (see Section 14.7).

A 950-kg, cylindrical can buoy floats vertically in salt water. The diameter of the buoy is 0.900 m. (a) Calculate the additional distance the buoy will sink when a 70.0-kg man stands on top of it. (Use the expression derived in part (b) of Problem 14.76.) (b) Calculate the period of the resulting vertical SHM when the man dives off. (Use the expression derived in part (c) of Problem 14.76, and as in that problem, you can ignore the damping due to fluid friction.)

Tarzan spies a 35-kg chimpanzee in severe danger, so he swings to the rescue. He adjusts his strong, but very light, vine so that he will first come to rest 4.0 s after beginning his swing, at which time his vine makes a 12 angle with the vertical. (a) How long is Tarzans vine, assuming that he swings at the bottom end of it? (b) What are the frequency and amplitude (in degrees) of Tarzans swing? (c) Just as he passes through the lowest point in his swing, Tarzan nabs the chimp from the ground and sweeps him out of the jaws of danger. If Tarzans mass is 65 kg, find the frequency and amplitude (in degrees) of the swing with Tarzan holding onto the grateful chimp.

A square object of mass m is constructed of four identical uniform thin sticks, each of length L, attached together. This object is hung on a hook at its upper corner (Fig. P14.79). If it is rotated slightly to the left and then released, at what frequency will it swing back and forth?

An object with mass 0.200 kg is acted on by an elastic restoring force with force constant 10.0 N/m. (a) Graph elastic potential energy U as a function of displacement x over a range of x from -0.300 m to +0.300 m. On your graph, let 1 cm = 0.05 J vertically and 1 cm = 0.05 m horizontally. The object is set into oscillation with an initial potential energy of 0.140 J and an initial kinetic energy of 0.060 J. Answer the following questions by referring to the graph. (b) What is the amplitude of oscillation? (c) What is the potential energy when the displacement is one half the amplitude? (d) At what displacement are the kinetic and potential energies equal? (e) What is the value of the phase angle \(\phi\) if the initial velocity is positive and the initial displacement is negative?

A 2.00-kg bucket containing 10.0 kg of water is hanging from a vertical ideal spring of force constant and oscillating up and down with an amplitude of 3.00 cm. Suddenly the bucket springs a leak in the bottom such that water drops out at a steady rate of When the bucket is half full, find (a) the period of oscillation and (b) the rate at which the period is changing with respect to time. Is the period getting longer or shorter? (c) What is the shortest period this system can have?

A hanging wire is 1.80 m long. When a 60.0-kg steel ball is suspended from the wire, the wire stretches by 2.00 mm. If the ball is pulled down a small additional distance and released, at what frequency will it vibrate? Assume that the stress on the wire is less than the proportional limit (see Section 11.5).

A 5.00-kg partridge is suspended from a pear tree by an ideal spring of negligible mass. When the partridge is pulled down 0.100 m below its equilibrium position and released, it vibrates with a period of 4.20 s. (a) What is its speed as it passes through the equilibrium position? (b) What is its acceleration when it is 0.050 m above the equilibrium position? (c) When it is moving upward, how much time is required for it to move from a point 0.050 m below its equilibrium position to a point 0.050 m above it? (d) The motion of the partridge is stopped, and then it is removed from the spring. How much does the spring shorten?

A 0.0200-kg bolt moves with SHM that has an amplitude of 0.240 m and a period of 1.500 s. The displacement of the bolt is \(+0.240\mathrm{\ m}\) when \(t=0\). Compute (a) the displacement of the bolt when \(t=0.500\mathrm{\ s}\) (b) the magnitude and direction of the force acting on the bolt when \(t=0.500\mathrm{\ s}\) (c) the minimum time required for the bolt to move from its initial position to the point where \(x=-0.180\mathrm{\ m}\) (d) the speed of the bolt when \(x=-0.180\mathrm{\ m}\).

SHM of a Butchers Scale. A spring of negligible mass and force constant is hung vertically, and a 0.200-kg pan is suspended from its lower end. A butcher drops a 2.2-kg steak onto the pan from a height of 0.40 m. The steak makes a totally inelastic collision with the pan and sets the system into vertical SHM. What are (a) the speed of the pan and steak immediately after the collision; (b) the amplitude of the subsequent motion; (c) the period of that motion?

A uniform beam is suspended horizontally by two identical vertical springs that are attached between the ceiling and each end of the beam. The beam has mass 225 kg, and a 175-kg sack of gravel sits on the middle of it. The beam is oscillating in SHM, with an amplitude of 40.0 cm and a frequency of (a) The sack of gravel falls off the beam when the beam has its maximum upward displacement. What are the frequency and amplitude of the subsequent SHM of the beam? (b) If the gravel instead falls off when the beam has its maximum speed, what are the frequency and amplitude of the subsequent SHM of the beam?

On the planet Newtonia, a simple pendulum having a bob with mass 1.25 kg and a length of 185.0 cm takes 1.42 s, when released from rest, to swing through an angle of where it again has zero speed. The circumference of Newtonia is measured to be 51,400 km. What is the mass of the planet Newtonia?

A 40.0-N force stretches a vertical spring 0.250 m. (a) What mass must be suspended from the spring so that the system will oscillate with a period of 1.00 s? (b) If the amplitude of the motion is 0.050 m and the period is that specified in part (a), where is the object and in what direction is it moving 0.35 s after it has passed the equilibrium position, moving downward? (c) What force (magnitude and direction) does the spring exert on the object when it is 0.030 m below the equilibrium position, moving upward?

Dont Miss the Boat. While on a visit to Minnesota (Land of 10,000 Lakes), you sign up to take an excursion around one of the larger lakes. When you go to the dock where the 1500-kg boat is tied, you find that the boat is bobbing up and down in the waves, executing simple harmonic motion with amplitude 20 cm. The boat takes 3.5 s to make one complete up-and-down cycle. When the boat is at its highest point, its deck is at the same height as the stationary dock. As you watch the boat bob up and down, you (mass 60 kg) begin to feel a bit woozy, due in part to the previous nights dinner of lutefisk. As a result, you refuse to board the boat unless the level of the boats deck is within 10 cm of the dock level. How much time do you have to board the boat comfortably during each cycle of up-and-down motion?

An interesting, though highly impractical example of oscillation is the motion of an object dropped down a hole that extends from one side of the earth, through its center, to the other side. With the assumption (not realistic) that the earth is a sphere of uniform density, prove that the motion is simple harmonic and find the period. [Note: The gravitational force on the object as a function of the objects distance r from the center of the earth was derived in Example 13.10 (Section 13.6). The motion is simple harmonic if the acceleration and the displacement from equilibrium x are related by Eq. (14.8), and the period is then ]

A rifle bullet with mass 8.00 g and initial horizontal velocity 280 m s strikes and embeds itself in a block with mass 0.992 kg that rests on a frictionless surface and is attached to one end of an ideal spring. The other end of the spring is attached to the wall. The impact compresses the spring a maximum distance of 18.0 cm. After the impact, the block moves in SHM. Calculate the period of this motion.

CP CALC For a certain oscillator the net force on the body with mass m is given by (a) What is the potential energy function for this oscillator if we take at (b) One-quarter of a period is the time for the body to move from to Calculate this time and hence the period. [Hint: Begin with Eq. (14.20), modified to include the potential-energy function you found in part (a), and solve for the velocity as a function of x. Then replace with Separate the variable by writing all factors containing x on one side and all factors containing t on the other side so that each side can be integrated. In the x-integral make the change of variable The resulting integral can be evaluated by numerical methods on a computer and has the value ] (c) According to the result you obtained in part (b), does the period depend on the amplitude A of the motion? Are the oscillations simple harmonic?

An approximation for the potential energy of a KCl molecule is \(U=A\left[\left(R_{0}^{7} / 8 r^{8}\right)-1 / r\right]\) where \(R_0=2.67\times10^{-10}\mathrm{\ m}\), \(A=2.31\times10^{-28}\mathrm{\ J}\cdot\mathrm{m}\), and r is the distance between the two atoms. Using this approximation: (a) Show that the radial component of the force on each atom is \(F_{r}=A\left[\left(R_{0}^{7} / r^{9}\right)-1 / r^{2}\right]\). (b) Show that \(R_{0}\) is the equilibrium separation. (c) Find the minimum potential energy. (d) Use \(r=R_{0}+x\) and the first two terms of the binomial theorem (Eq. 14.28) to show that \(F_r\approx-\left(7A/R_0^{\ 3}\right)x\), so that the molecules force constant is \(k=7A/R_0^{\ 3}\). (e) With both the K and Cl atoms vibrating in opposite directions on opposite sides of the molecule’s center of mass, \(m_1m_2/\left(m_1+m_2\right)=3.06\times10^{-26}\mathrm{\ kg}\) is the mass to use in calculating the frequency. Calculate the frequency of small-amplitude vibrations

Two uniform solid spheres, each with mass and radius , are connected by a short, light rod that is along a diameter of each sphere and are at rest on a horizontal tabletop. A spring with force constant has one end attached to the wall and the other end attached to a frictionless ring that passes over the rod at the center of mass of the spheres, which is midway between the centers of the two spheres. The spheres are each pulled the same distance from the wall, stretching the spring, and released. There is sufficient friction between the tabletop and the spheres for the spheres to roll without slipping as they move back and forth on the end of the spring. Show that the motion of the center of mass of the spheres is simple harmonic and calculate the period.

In Fig. P14.95 the upper ball is released from rest, collides with the stationary lower ball, and sticks to it. The strings are both 50.0 cm long. The upper ball has mass 2.00 kg, and it is initially 10.0 cm higher than the lower ball, which has mass 3.00 kg. Find the frequency and maximum angular displacement of the motion after the collision.

T. rex. Model the leg of the T. rex in Example 14.10 (Section 14.6) as two uniform rods, each 1.55 m long, joined rigidly end to end. Let the lower rod have mass M and the upper rod mass 2M. The composite object is pivoted about the top of the upper rod. Compute the oscillation period of this object for small-amplitude oscillations. Compare your result to that of Example 14.10.

CALC A slender, uniform, metal rod with mass M is pivoted without friction about an axis through its midpoint and perpendicular to the rod. A horizontal spring with force constant k is attached to the lower end of the rod, with the other end of the spring attached to a rigid support. If the rod is displaced by a small angle from the vertical (Fig. P14.97) and released, show that it moves in angular SHM and calculate the period. (Hint: Assume that the angle is small enough for the approximations and to be valid. The motion is simple harmonic if and the period is then

The Silently Ringing Bell Problem. A large bell is hung from a wooden beam so it can swing back and forth with negligible friction. The center of mass of the bell is 0.60 m below the pivot, the bell has mass 34.0 kg, and the moment of inertia of the bell about an axis at the pivot is The clapper is a small, 1.8-kg mass attached to one end of a slender rod that has length L and negligible mass. The other end of the rod is attached to the inside of the bell so it can swing freely about the same axis as the bell. What should be the length L of the clapper rod for the bell to ring silentlythat is, for the period of oscillation for the bell to equal that for the clapper?

Two identical thin rods, each with mass m and length L, are joined at right angles to form an L-shaped object. This object is balanced on top of a sharp edge (Fig. P14.99). If the L-shaped object is deflected slightly, it oscillates. Find the frequency of oscillation.

CP CALC A uniform rod of length L oscillates through small angles about a point a distance x from its center. (a) Prove that its angular frequency is (b) Show that its maximum angular frequency occurs when (c) What is the length of the rod if the maximum angular frequency

The Effective Force Constant of Two Springs. Two springs with the same unstretched length but different force constants and are attached to a block with mass m on a level, frictionless surface. Calculate the effective force constant in each of the three cases (a), (b), and (c) depicted in Fig. P14.101. (The effective force constant is defined by -k ) (d) An object with mass m, suspended from a uniform spring with a force constant k, vibrates with a frequency When the spring is cut in half and the same object is suspended from one of the halves, the frequency is What is the ratio 2>1?

Two springs, each with unstretched length 0.200 m but with different force constants and are attached to opposite ends of a block with mass m on a level, frictionless surface. The outer ends of the springs are now attached to two pins and 0.100 m from the original positions of the ends of the springs (Fig. P14.102). Let and (a) Find the length of each spring when the block is in its new equilibrium position after the springs have been attached to the pins. (b) Find the period of vibration of the block if it is slightly displaced from its new equilibrium position and released

CALC A Spring with Mass. The preceding problems in this chapter have assumed that the springs had negligible mass. But of course no spring is completely massless. To find the effect of the springs mass, consider a spring with mass M, equilibrium length and spring constant k. When stretched or compressed to a length L, the potential energy is where (a) Consider a spring, as described above, that has one end fixed and the other end moving with speed Assume that the speed of points along the length of the spring varies linearly with distance l from the fixed end. Assume also that the mass M of the spring is distributed uniformly along the length of the spring. Calculate the kinetic energy of the spring in terms of M and (Hint: Divide the spring into pieces of length dl; find the speed of each piece in terms of l, and L; find the mass of each piece in terms of dl, M, and L; and integrate from 0 to L. The result is not since not all of the spring moves with the same speed.) (b) Take the time derivative of the conservation of energy equation, Eq. (14.21), for a mass m moving on the end of a massless spring. By comparing 1 2 Mv2 , v, your results to Eq. (14.8), which defines show that the angular frequency of oscillation is (c) Apply the procedure of part (b) to obtain the angular frequency of oscillation of the spring considered in part (a). If the effective mass of the spring is defined by what is in terms of v = 2k>M, M M?

An object is moving with SHM of amplitude A on the end of a spring. If the amplitude is doubled, what happens to the total distance the object travels in one period? What happens to the period? What happens to the maximum speed of the object? Discuss how these answers are related.

Problem 1E BIO (a) Music. When a person sings, his or her vocal cords vibrate in a repetitive pattern that has the same frequency as the note that is sung. If someone sings the note B flat, which has a frequency of 466 Hz, how much time does it take the person’s vocal cords to vibrate through one complete cycle, and what is the angular frequency of the cords? (b) Hearing. When sound waves strike the eardrum, this membrane vibrates with the same frequency as the sound. The highest pitch that young humans can hear has a period of 50.0 µs. What are the frequency and angular frequency of the vibrating eardrum for this sound? (c) Vision. When light having vibrations with angular frequency ranging from 2.7 X 1015 rad/s to 4.7 X 1015 rad/s strikes the retina of the eye, it stimulates the receptor cells there and is perceived as visible light. What are the limits of the period and frequency of this light? (d) Ultrasound. High-frequency sound waves (ultrasound) are used to probe the interior of the body, much as x rays do. To detect small objects such as tumors, a frequency of around 5.0 MHz is used. What are the period and angular frequency of the molecular vibrations caused by this pulse of sound?

Problem 2DQ Think of several examples in everyday life of motions that are, at least approximately, simple harmonic. In what respects does each differ from SHM?

Problem 2E If an object on a horizontal, frictionless surface is attached to a spring, displaced, and then released, it will oscillate. If it is displaced 0.120 m from its equilibrium position and released with zero initial speed, then after 0.800 s its displacement is found to be 0.120 m on the opposite side, and it has passed the equilibrium position once during this interval. Find (a) the amplitude; (b) the period; (c) the frequency.

Problem 3DQ Does a tuning fork or similar tuning instrument undergo SHM? Why is this a crucial question for musicians?

Problem 3E The tip of a tuning fork goes through 440 complete vibrations in 0.500 s. Find the angular frequency and the period of the motion.

Problem 4DQ A box containing a pebble is attached to an ideal horizontal spring and is oscillating on a friction-free air table. When the box has reached its maximum distance from the equilibrium point, the pebble is suddenly lifted out vertically without disturbing the box. Will the following characteristics of the motion increase, decrease, or remain the same in the subsequent motion of the box? Justify each answer. (a) Frequency; (b) period; (c) amplitude; (d) the maximum kinetic energy of the box; (e) the maximum speed of the box.

The displacement of an oscillating object as a function of time is shown in Fig. E14.4. What are (a) the frequency; (b) the amplitude; (c) the period; (d) the angular frequency of this motion?

Problem 5DQ If a uniform spring is cut in half, what is the force constant of each half? Justify your answer. How would the frequency of SHM using a half-spring differ from the frequency using the same mass and the entire spring?

When a body of unknown mass is attached to an ideal spring with force constant 120 N/m, it is found to vibrate with a frequency of 6.00 Hz. Find (a) the period of the motion; (b) the angular frequency; (c) the mass of the body.

Problem 8DQ You are captured by Martians, taken into their ship, and put to sleep. You awake some time later and find yourself locked in a small room with no windows. All the Martians have left you with is your digital watch, your school ring, and your long silver-chain necklace. Explain how you can determine whether you are still on earth or have been transported to Mars.

Problem 8E When a 0.750-kg mass oscillates on an ideal spring, the frequency is 1.33 Hz. What will the frequency be if 0.220 kg are (a) added to the original mass and (b) subtracted from the original mass? Try to solve this problem without finding the force constant of the spring.

The system shown in Fig. 14.17 is mounted in an elevator. What happens to the period of the motion (does it increase, decrease, or remain the same) if the elevator (a) accelerates upward at \(5.0 \mathrm{~m} / \mathrm{s}^{2}\) ; (b) moves upward at a steady \(5.0 \mathrm{~m} / \mathrm{s}\) ; (c) accelerates downward at \(5.0 \mathrm{~m} / \mathrm{s}^{2}\) ? Justify your answers.

Problem 9E An object is undergoing SHM with period 0.900 s and amplitude 0.320 m. At t = 0 the object is at x = 0.320 m and is instantaneously at rest. Calculate the time it takes the object to go (a) from x = 0.320 m to x = 0.160 m and (b) from x = 0.160 m to x = 0.

Problem 10DQ If a pendulum has a period of 2.5 s on earth, what would be its period in a space station orbiting the earth? If a mass hung from a vertical spring has a period of 5.0 s on earth, what would its period be in the space station? Justify your answers.

Problem 10E A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. When the block is at x = 0.280 m, the acceleration of the block is - 5.30 m/s2. What is the frequency of the motion?

Problem 11DQ A simple pendulum is mounted in an elevator. What happens to the period of the pendulum (does it increase, decrease, or remain the same) if the elevator (a) accelerates upward at 5.0 m/s2; (b) moves upward at a steady 5.0 m/s; (c) accelerates downward at 5.0 m/s2; (d) accelerates downward at 9.8 m/s2? Justify your answers.

Problem 11E A 2.00-kg, frictionless block is attached to an ideal spring with force constant 300 N/m. At t = 0 the spring is neither stretched nor compressed and the block is moving in the negative direction at 12.0 m/s. Find (a) the amplitude and (b) the phase angle. (c) Write an equation for the position as a function of time.

Problem 12DQ What should you do to the length of the string of a simple pendulum to (a) double its frequency; (b) double its period; (c) double its angular frequency?

Problem 12E Repeat Exercise 14.13, but assume that at t = 0 the block has velocity - 4.00 m > s and displacement + 0.200 m. 14.13 . A 2.00-kg, frictionless block is attached to an ideal spring with force constant 300 N/m. At t = 0 the spring is neither stretched nor compressed and the block is moving in the negative direction at 12.0 m/s. Find (a) the amplitude and (b) the phase angle. (c) Write an equation for the position as a function of time.

If a pendulum clock is taken to a mountaintop, does it gain or lose time, assuming it is correct at a lower elevation? Explain your answer.

Problem 13E The point of the needle of a sewing machine moves in SHM along the x -axis with a frequency of 2.5 Hz. At t = 0 its position and velocity components are + 1.1 cm and - 15 cm/s, respectively. (a) Find the acceleration component of the needle at t = 0. (b) Write equations giving the position, velocity, and acceleration components of the point as a function of time.

Problem 14DQ When the amplitude of a simple pendulum increases, should its period increase or decrease? Give a qualitative argument; do not rely on Eq. (14.35). Is your argument also valid for a physical pendulum?

Problem 14E A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. When the amplitude of the motion is 0.090 m, it takes the block 2.70 s to travel from x = 0.090 m to x = - 0.090 m. If the amplitude is doubled, to 0.180 m, how long does it take the block to travel (a) from x = 0.180 m to x = - 0.180 m and (b) from x = 0.090 m to x = - 0.090 m?

Problem 15DQ Why do short dogs (like Chihuahuas) walk with quicker strides than do tall dogs (like Great Danes)?

Problem 15E BIO Weighing Astronauts. This procedure has been used to “weigh” astronauts in space: A 42.5-kg chair is attached to a spring and allowed to oscillate. When it is empty, the chair takes 1.30 s to make one complete vibration. But with an astronaut sitting in it, with her feet off the floor, the chair takes 2.54 s for one cycle. What is the mass of the astronaut?

Problem 16DQ At what point in the motion of a simple pendulum is the string tension greatest? Least? In each case give the reasoning behind your answer.

A 0.400-kg object undergoing SHM has \(a_{x}=-2.70 \mathrm{~m} / \mathrm{s}^{2}\) when x = 0.300 m. What is the time for one oscillation?

On a frictionless, horizontal air track, a glider oscillates at the end of an ideal spring of force constant \(2.50 \mathrm{~N} / \mathrm{cm}\). The graph in Fig. E14.17 shows the acceleration of the glider as a function of time. Find (a) the mass of the glider; (b) the maximum displacement of the glider from the equilibrium point; (c) the maximum force the spring exerts on the glider. Equation Transcription: Text Transcription: 2.50 N/cm

Problem 18DQ For a simple pendulum, clearly distinguish between ? (the angular speed) and ? (the angular frequency). Which is constant and which is variable?

Problem 18E A 0.500-kg mass on a spring has velocity as a function of time given by vx(t) = -(3.60 cm/s) sin[( 4.71 rad/s)t – (?/2)]. What are (a) the period; (b) the amplitude; (c) the maximum acceleration of the mass; (d) the force constant of the spring?

Problem 19DQ A glider is attached to a fixed ideal spring and oscillates on a horizontal, friction-free air track. A coin rests atop the glider and oscillates with it. At what points in the motion is the friction force on the coin greatest? The least? Justify your answers.

In designing structures in an earthquake-prone region, how should the natural frequencies of oscillation of a structure relate to typical earthquake frequencies? Why? Should the structure have a large or small amount of damping?

Problem 23E A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. The amplitude of the motion is 0.12 m The maximum speed of the block is 3.90 m/s. What is the maximum magnitude of the acceleration of block?

Problem 24E A small block is attached to an ideal spring and is moving in SHM on a horizontal, frictionless surface. The amplitude of the motion is 0.250 m and the period is 3.20 s. What are the speed and acceleration of the block when x = 0.160 m?

Problem 25E A tuning fork labelled 392 Hz has the tip of each of its two prongs vibrating with an amplitude of 0.600 mm. (a) What is the maximum speed of the tip of a prong? (b) A housefly (Musca domestica) with mass 0.0270 g is holding onto the tip of one of the prongs. As the prong vibrates, what is the fly’s maximum kinetic energy? Assume that the fly’s mass has a negligible effect on the frequency of oscillation.

Problem 26E A harmonic oscillator has angular frequency ? and amplitude A. (a) What are the magnitudes of the displacement and velocity when the elastic potential energy is equal to the kinetic energy? (Assume that U = 0 at equilibrium.) (b) How often does this occur in each cycle? What is the time between occurrences? (c) At an instant when the displacement is equal to A/2, what fraction of the total energy of the system is kinetic and what fraction is potential?

Problem 27E A 0.500-kg glider, attached to the end of an ideal spring with force constant k = 450 N/m, undergoes SHM with an amplitude of 0.040 m. Compute (a) the maximum speed of the glider; (b) the speed of the glider when it is at x = - 0.015 m; (c) the magnitude of the maximum acceleration of the glider; (d) the acceleration of the glider at x = - 0.015 m; (e) the total mechanical energy of the glider at any point in its motion.

Problem 28E A cheerleader waves her pom-pom in SHM with an amplitude of 18.0 cm and a frequency of 0.850 Hz. Find (a) the maximum magnitude of the acceleration and of the velocity; (b) the acceleration and speed when the pom-pom’s coordinate is x = + 9.0 cm; (c) the time required to move from the equilibrium position directly to a point 12.0 cm away. (d) Which of the quantities asked for in parts (a), (b), and (c) can be found by using the energy approach used in Section 14.3, and which cannot? Explain.

For the situation described in part (a) of Example 14.5, what should be the value of the putty mass so that the amplitude after the collision is one-half the original amplitude? For this value of , what fraction of the original mechanical energy is converted into heat?

Problem 30E A 0.150-kg toy is undergoing SHM on the end of a horizontal spring with force constant k = 300 N/m. When the object is 0.0120 m from its equilibrium position, it is observed to have a speed of 0.300 m/s. What are (a) the total energy of the object at any point of its motion; (b) the amplitude of the motion; (c) the maximum speed attained by the object during its motion?

You are watching an object that is moving in SHM. When the object is displaced 0.600 m to the right of its equilibrium position, it has a velocity of 2.20 m/s to the right and an acceleration of 8.40 m/s\(^{2}\) to the left. How much farther from this point will the object move before it stops momentarily and then starts to move back to the left?

Problem 32E On a horizontal, frictionless table, an open-topped 5.20-kg box is attached to an ideal horizontal spring having force constant 375 N/m. Inside the box is a 3.44-kg stone. The system is oscillating with an amplitude of 7.50 cm. When the box has reached its maximum speed, the stone is suddenly plucked vertically out of the box without touching the box. Find (a) the period and (b) the amplitude of the resulting motion of the box. (c) Without doing any calculations, is the new period greater or smaller than the original period? How do you know?

Problem 33E A mass is oscillating with amplitude A at the end of a spring. How far (in terms of A) is this mass from the equilibrium position of the spring when the elastic potential energy equals the kinetic energy?

A mass \(m\) is attached to a spring of force constant \(75 N/m\) and allowed to oscillate. Figure E14.34 shows a graph of its velocity \(v_{x}\) as a function of time t. Find (a) the period, (b) the frequency, and (c) the angular frequency of this motion. (d) What is the amplitude (in cm), and at what times does the mass reach this position? (e) Find the maximum acceleration of the mass and the times at which it occurs. (f) What is the mass \(m\)?

Problem 35E Inside a NASA test vehicle, a 3.50-kg ball is pulled along by a horizontal ideal spring fixed to a friction-free table. The force constant of the spring is 225 N/m. The vehicle has a steady acceleration of 5.00 m/s2, and the ball is not oscillating. Suddenly, when the vehicle’s speed has reached 45.0 m/s, its engines turn off, thus eliminating its acceleration but not its velocity. Find (a) the amplitude and (b) the frequency of the resulting oscillations of the ball. (c) What will be the ball’s maximum speed relative to the vehicle?

Problem 36E A proud deep-sea fisherman hangs a 65.0-kg fish from an ideal spring having negligible mass. The fish stretches the spring 0.120 m. (a) Find the force constant of the spring. The fish is now pulled down 5.00 cm and released. (b) What is the period of oscillation of the fish? (c) What is the maximum speed it will reach?

Problem 37E A 175-g glider on a horizontal, frictionless air track is attached to a fixed ideal spring with force constant 155 N/m. At the instant you make measurements on the glider, it is moving at 0.815 m/s and is 3.00 cm from its equilibrium point. Use energy conservation to find (a) the amplitude of the motion and (b) the maximum speed of the glider. (c) What is the angular frequency of the oscillations?

Problem 38E A thrill-seeking cat with mass 4.00 kg is attached by a harness to an ideal spring of negligible mass and oscillates vertically in SHM. The amplitude is 0.050 m, and at the highest point of the motion the spring has its natural unstretched length. Calculate the elastic potential energy of the spring (take it to be zero for the unstretched spring), the kinetic energy of the cat, the gravitational potential energy of the system relative to the lowest point of the motion, and the sum of these three energies when the cat is (a) at its highest point; (b) at its lowest point; (c) at its equilibrium position.

Problem 39E A 1.50-kg ball and a 2.00-kg ball are glued together with the lighter one below the heavier one. The upper ball is attached to a vertical ideal spring of force constant 165 N/m. and the system is vibrating vertically with amplitude 15.0 cm. The glue connecting the balls is old and weak, and it suddenly comes loose when the balls are at the lowest position in their motion. (a) Why is the glue more likely to fail at the lowest point than at any other point in the motion? (b) Find the amplitude and frequency of the vibrations after the lower ball has come loose.

Problem 40E A uniform, solid metal disk of mass 6.50 kg and diameter 24.0 cm hangs in a horizontal plane, supported at its center by a vertical metal wire. You find that it requires a horizontal force of 4.23 N tangent to the rim of the disk to turn it by 3.34o, thus twisting the wire. You now remove this force and release the disk from rest. (a) What is the torsion constant for the metal wire? (b) What are the frequency and period of the torsional oscillations of the disk? (c) Write the equation of motion for ?(t) for the disk.

A certain alarm clock ticks four times each second, with each tick representing half a period. The balance wheel consists of a thin rim with radius \(0.55 \mathrm{~cm}\), connected to the balance staff by thin spokes of negligible mass. The total mass of the balance wheel is \(0.90 \mathrm{~g}\). (a) What is the moment of inertia of the balance wheel about its shaft? (b) What is the torsion constant of the coil spring (Fig. 14.19)? Equation Transcription: Text Transcription: 0.55 cm 0.90 g

A thin metal disk with mass \(2.00 \times 10^{-3} \mathrm{~kg}\) and radius \(2.20 \mathrm{~cm}\) is attached at its center to a long fiber (Fig. E14.42). The disk, when twisted and released, oscillates with a period of \(1.00 \mathrm{~s}\). Find the torsion constant of the fiber. Equation Transcription: Text Transcription: 2.00 x 10^-3 kg 2.20 cm 1.00 s

Problem 43E You want to find the moment of inertia of a complicated machine part about an axis through its center of mass. You suspend it from a wire along this axis. The wire has a torsion constant of 0.450 N ? m/rad. You twist the part a small amount about this axis and let it go, timing 165 oscillations in 265 s. What is its moment of inertia?

Problem 44E CALC The balance wheel of a watch vibrates with an angular amplitude ?, angular frequency ?, and phase angle ? = 0. (a) Find expressions for the angular velocity d?/dt and angular acceleration d2?/dt2 as functions of time. (b) Find the balance wheel’s angular velocity and angular acceleration when its angular displacement is ?, and when its angular displacement is ?/2 and ? is decreasing. (Hint: Sketch a graph of ? versus t.)

Problem 45E You pull a simple pendulum 0.240 m long to the side through an angle of 3.50o and release it. (a) How much time does it take the pendulum bob to reach its highest speed? (b) How much time does it take if the pendulum is released at an angle of 1.75o instead of 3.50o?

Problem 46E An 85.0-kg mountain climber plans to swing down, starting from rest, from a ledge using a light rope 6.50 m long. He holds one end of the rope, and the other end is tied higher up on a rock face. Since the ledge is not very far from the rock face, the rope makes a small angle with the vertical. At the lowest point of his swing, he plans to let go and drop a short distance to the ground. (a) How long after he begins his swing will the climber first reach his lowest point? (b) If he missed the first chance to drop off, how long after first beginning his swing will the climber reach his lowest point for the second time?

Problem 47E A building in San Francisco has light fixtures consisting of small 2.35-kg bulbs with shades hanging from the ceiling at the end of light, thin cords 1.50 m long. If a minor earthquake occurs, how many swings per second will these fixtures make?

Problem 48E A Pendulum on Mars. A certain simple pendulum has a period on the earth of 1.60 s. What is its period on the surface of Mars, where g = 3.71 m/s2?

Problem 49E After landing on an unfamiliar planet, a space explorer constructs a simple pendulum of length 50.0 cm. She finds that the pendulum makes 100 complete swings in 136 s. What is the value of g on this planet?

A \(\text { 1.80-kg }\) connecting rod from a car engine is pivoted about a horizontal knife edge as shown in Fig. E14.53. The center of gravity of the rod was located by balancing and is \(0.200 \mathrm{~m}\) from the pivot. When the rod is set into small-amplitude oscillation, it makes 100 complete swings in \(120 \mathrm{~s}\). Calculate the moment of inertia of the rod about the rotation axis through the pivot. Equation Transcription: Text Transcription: 1.80-kg 0.200 m 120 s d=0.200 m

Problem 54E A 1.80-kg monkey wrench is pivoted 0.250 m from its center of mass and allowed to swing as a physical pendulum. The period for small-angle oscillations is 0.940 s. (a) What is the moment of inertia of the wrench about an axis through the pivot? (b) If the wrench is initially displaced 0.400 rad from its equilibrium position, what is the angular speed of the wrench as it passes through the equilibrium position?

Problem 56E CP A holiday ornament in the shape of a hollow sphere with mass M = 0.015 kg and radius R = 0.050 m is hung from a tree limb by a small loop of wire attached to the surface of the sphere. If the ornament is displaced a small distance and released, it swings back and forth as a physical pendulum with negligible friction. Calculate its period. (Hint: Use the parallel-axis theorem to find the moment of inertia of the sphere about the pivot at the tree limb.)

The two pendulums shown in Fig. E14.57 each consist of a uniform solid ball of mass \(M\) supported by a rigid massless rod, but the ball for pendulum \(A\) is very tiny while the ball for pendulum \(B\) is much larger. Find the period of each pendulum for small displacements. Which ball takes longer to complete a swing? Equation Transcription: Text Transcription: M A B L/2

A \(2.50-\mathrm{kg}\) rock is attached at the end of a thin, very light rope \(1.45 \mathrm{~m}\) long. You start it swinging by releasing it when the rope makes an \(11^{\circ}\) angle with the vertical. You record the observation that it rises only to an angle of \(4.5^{\circ}\) with the vertical after \(10 \frac{1}{2}\) swings. (a) How much energy has this system lost during that time? (b) What happened to the “lost” energy? Explain how it could have been “lost.” Equation Transcription: ° ° Text Transcription: 2.50-kg 1.45 m 11^\circ 4.5^\circ 10 \frac 1 over 2

Problem 59E An unhappy 0.300-kg rodent, moving on the end of a spring with force constant k = 2.50 N/m, is acted on by a damping force Fx = -bvx. (a) If the constant b has the value 0.900 kg/s, what is the frequency of oscillation of the rodent? (b) For what value of the constant b will the motion be critically damped?

Problem 60E A 50.0-g hard-boiled egg moves on the end of a spring with force constant k = 25.0 N/m. Its initial displacement is 0.300 m. A damping force Fx = -bvx acts on the egg, and the amplitude of the motion decreases to 0.100 m in 5.00 s. Calculate the magnitude of the damping constant b.

The motion of an underdamped oscillator is described by Eq. (14.42). Let the phase angle \(\varphi\) be zero. (a) According to this equation, what is the value of \(x\) at \(t=0^{\prime}\)? (b) What are the magnitude and direction of the velocity at \(t=0^{\prime}\)? What does the result tell you about the slope of the graph of \(x\) versus \(t\) near \(t=0^{\prime}\)? (c) Obtain an expression for the acceleration \(a_{x}\) at \(t=0^{\prime}\). For what value or range of values of the damping constant \(b\) (in terms of \(k \text { and } m\)) is the acceleration at \(t=0^{\prime}\) negative, zero, and positive? Discuss each case in terms of the shape of the graph of \(x\) versus \(t\) near \(t=0^{\prime}\). Equation Transcription: Text Transcription: \phi x t=0 t=0 x t t=0 a_x t=0 b k and m t=0 x t t=0

A mass is vibrating at the end of a spring of force constant \(225 \mathrm{~N} \mathrm{~m}\). Figure E14.62 shows a graph of its position \(x\) as a function of time \(t\). (a) At what times is the mass not moving? (b) How much energy did this system originally contain? (c) How much energy did the system lose between \(t=1.0 \mathrm{~s}\) and \(t=4.0 \mathrm{~s}\)? Where did this energy go? Equation Transcription: Text Transcription: 225 N m x t t=1.0 s and t=4.0 s

A sinusoidally varying driving force is applied to a damped harmonic oscillator. (a) What are the units of the damping constant \(b\)? (b) Show that the quantity \(\sqrt{k m}\) has the same units as \(b\) (c) In terms of \(F_{\max } \text { and } k\), what is the amplitude for \(\omega_{d}=\sqrt{k / m}\) when (i) \(b=0.2 \sqrt{\mathrm{km}}\) and (ii) \(b=0.4 \sqrt{\mathrm{km} ?}\) Compare your results to Fig. 14.28. Equation Transcription: Text Transcription: b \sqrt k m B F_\max \text and k \omega_d=\sqrt k / m b=0.2 \sqrt\km b=0.4 \sqrt{\mathm ?

A sinusoidally varying driving force is applied to a damped harmonic oscillator of force constant \(k\) and mass \(m\). If the damping constant has a value \(b_{1}\) the amplitude is \(A_{1}\) when the driving angular frequency equals \(\sqrt{k / m}\) In terms of \(A_{1}\) what is the amplitude for the same driving frequency and the same driving force amplitude \(F_{\max }\) if the damping constant is (a) \(3 b_{1}\) and\(b_{1} / 2\)? Equation Transcription: Text Transcription: k m b_1 A_1 \sqrt k / m A_1 F_max 3 b_1 b_1/2

Problem 65P An object is undergoing SHM with period 1.200 s and amplitude 0.600 m. At t = 0 the object is at x = 0 and is moving in the negative x -direction. How far is the object from the equilibrium position when t = 0.480 s?

Problem 66P An object is undergoing SHM with period 0.300 s and amplitude 6.00 cm. At t = 0 the object is instantaneously at rest at x = 6.00 cm. Calculate the time it takes the object to go from x = 6.00 cm to x = - 1.50 cm.

Problem 67P SHM in a Car Engine. The motion of the piston of an automobile engine is approximately simple harmonic. (a) If the stroke of an engine (twice the amplitude) is 0.100 m and the engine runs at 4500 rev/min, compute the acceleration of the piston at the endpoint of its stroke. (b) If the piston has mass 0.450 kg, what net force must be exerted on it at this point? (c) What are the speed and kinetic energy of the piston at the midpoint of its stroke? (d) What average power is required to accelerate the piston from rest to the speed found in part (c)? (e) If the engine runs at 7000 rev/min, what are the answers to parts (b), (c), and (d)?

Problem 68P Four passengers with combined mass 250 kg compress the springs of a car with worn-out shock absorbers by 4.00 cm when they get in. Model the car and passengers as a single body on a single ideal spring. If the loaded car has a period of vibration of 1.92 s, what is the period of vibration of the empty car?

Problem 69P A glider is oscillating in SHM on an air track with an amplitude A1. You slow it so that its amplitude is halved. What happens to its (a) period, frequency, and angular frequency; (b) total mechanical energy; (c) maximum speed; (d) speed at x = ±A1/4; (e) potential and kinetic energies at x = ±A1/4?

Problem 70P A child with poor table manners is sliding his 250-g dinner plate back and forth in SHM with an amplitude of 0.100 m on a horizontal surface. At a point 0.060 m away from equilibrium, the speed of the plate is 0.400 m/s. (a) What is the period? (b) What is the displacement when the speed is 0.160 m/s? (c) In the center of the dinner plate is a 10.0-g carrot slice. If the carrot slice is just on the verge of slipping at the endpoint of the path, what is the coefficient of static friction between the carrot slice and the plate?

Problem 71P A 1.50-kg, horizontal, uniform tray is attached to a vertical ideal spring of force constant 185 N/m and a 275-g metal ball is in the tray. The spring is below the tray, so it can oscillate up and down. The tray is then pushed down to point A, which is 15.0 cm below the equilibrium point, and released from rest. (a) How high above point A will the tray be when the metal ball leaves the tray? (Hint: This does not occur when the ball and tray reach their maximum speeds.) (b) How much time elapses between releasing the system at point A and the ball leaving the tray? (c) How fast is the ball moving just as it leaves the tray?

Problem 73P A 10.0-kg mass is travelling to the right with a speed of 2.00 m/s on a smooth horizontal surface when it collides with and sticks to a second 10.0-kg mass that is initially at rest but is attached to a light spring with force constant 110.0 N/m. (a) Find the frequency, amplitude, and period of the subsequent oscillations. (b) How long does it take the system to return the first time to the position it had immediately after the collision?

Problem 74P A rocket is accelerating upward at 4.00 m/s2 from the launch pad on the earth. Inside a small, 1.50-kg ball hangs from the ceiling by a light, 1.10-m wire. If the ball is displaced 8.50° from the vertical and released, find the amplitude and period of the resulting swings of this pendulum.

Problem 75P An apple weighs 1.00 N. When you hang it from the end of a long spring of force constant 1.50 N/m and negligible mass, it bounces up and down in SHM. If you stop the bouncing and let the apple swing from side to side through a small angle, the frequency of this simple pendulum is half the bounce frequency. (Because the angle is small, the back-and-forth swings do not cause any appreciable change in the length of the spring.) What is the unstretched length of the spring (with the apple removed)?

Problem 76P CP SHM of a Floating Object. An object with height h, mass M, and a uniform cross-sectional area A floats upright in a liquid with density ?. (a) Calculate the vertical distance from the surface of the liquid to the bottom of the floating object at equilibrium. (b) A downward force with magnitude F is applied to the top of the object. At the new equilibrium position, how much farther below the surface of the liquid is the bottom of the object than it was in part (a)? (Assume that some of the object remains above the surface of the liquid.) (c) Your result in part (b) shows that if the force is suddenly removed, the object will oscillate up and down in SHM. Calculate the period of this motion in terms of the density ? of the liquid, the mass M, and the cross-sectional area A of the object. You can ignore the damping due to fluid friction (see Section 14.7).

Problem 77P A 950-kg, cylindrical can buoy floats vertically in salt water. The diameter of the buoy is 0.900 m. (a) Calculate the additional distance the buoy will sink when a 70.0-kg man stands on top of it. (Use the expression derived in part (b) of below problem) (b) Calculate the period of the resulting vertical SHM when the man dives off. (Use the expression derived in Part (c) of below problem, and as in that problem, you can ignore the damping, due to fluid friction.) Problem: An object with height h, mass M, and a uniform cross-sectional area A floats upright in a liquid with density ?. (a) Calculate the vertical distance from the surface of the liquid to the bottom of the floating object at equilibrium. (b) A downward force with magnitude F applied to the top of the object. At the new equilibrium how much farther below the surface of the liquid is the bottom of the object than it was in part (a)? (Assume that some of the object remains above the surface of the liquid.) (c) Your result in part (b) shows that if the force is suddenly removed, the object will oscillate up and down in SHM. Calculate the period of this motion in terms of the density ? of the liquid, the mass M, and the cross sectional area A of the object. You can ignore the damping due to fluid friction (see Section 14.7).

Problem 78P Tarzan to the Rescue! Tarzan spies a 35 Kg chimpanzee in severe danger, so he swings to the rescue adjusts his strong, but very light, vine so that he will first come to rest 4.0 s after beginning Iris swing, at which time-his vine makes a 12° angle with the vertical. (a) How long is Taiwan’s vine, assuming that lie swings at the bottom end of it? (b) What are the frequency and amplitude (in degrees) of Tarzan’s swing? (c) Just as he passes through the lowest point in his swing, Tarzan nabs the chimp from the ground and sweeps him out of the jaws of danger. If Tarzan’s mass is 65 kg, find the frequency and amplitude (in degrees) of the swing with Tarzan holding onto the grateful chimp.

A square object of mass is constructed of four identical uniform thin sticks, each of length , attached together. This object is hung on a hook at its upper corner (Fig. P14.79). If it is rotated slightly to the left and then released, at what frequency will it swing back and forth?

Problem 83P A 5.00-kg partridge is suspended from a pear tree by an ideal spring of negligible mass. When the partridge is pulled down 0.100 m below its equilibrium position and released, it vibrates with a period of 4.20 s. (a) What is its speed as it passes through the equilibrium position? (b) What is its acceleration when it is 0.050 m above the equilibrium position? (c) When it is moving upward, how much time is required for it to move from a point 0.050 m below its equilibrium position to a point 0.050 m above it? (d) The motion of the partridge is stopped, and then it is removed from the spring. How much does the spring shorten?

Problem 84P A 0.0200-kg bolt moves with SHM that has an amplitude of 0.240 m and a period of 1.500 s. The displacement of the bolt is + 0.240 m when t = 0. Compute (a) the displacement of the bolt when t = 0.500 s; (b) the magnitude and direction of the force acting on the bolt when t = 0.500 s; (c) the minimum time required for the bolt to move from its initial position to the point where x = - 0.180 m; (d) the speed of the bolt when x = - 0.180 m.

Problem 85P CP SHM of a Butcher’s Scale. A spring of negligible mass and force constant k = 400 N/m is hung vertically, and a 0.200-kg pan is suspended from its lower end. A butcher drops a 2.2-kg steak onto the pan from a height of 0.40 m. The steak makes a totally inelastic collision with the pan and sets the system into vertical SHM. What are (a) the speed of the pan and steak immediately after the collision; (b) the amplitude of the subsequent motion; (c) the period of that motion?

Problem 86P A uniform beam is suspended horizontally by two identical vertical springs that are attached between the ceiling and each end of the beam. The beam has mass 225 kg, and a 175-kg sack of gravel sits on the middle of it. The beam is oscillating in SHM with an amplitude of 40.0 cm and a frequency of 0.600 cycle/s. (a) The sack falls off the beam when the beam has its maximum upward displacement. What are the frequency and amplitude of the subsequent SHM of the beam? (b) If the sack instead falls off when the beam has its maximum speed, repeat part (a).

Problem 87P On the planet Newtonia, a simple pendulum having a bob with mass 1.25 kg and a length of 185.0 cm takes 1.42 s, when released from rest, to swing through an angle of 12.5°, where it again has zero speed. The circumference of Newtonia is measured to be 51,400 km. What is the mass of the planet Newtonia?

Problem 88P A 40.0-N force stretches a vertical spring 0.250 m. (a) What mass must be suspended from the spring so that the system will oscillate with a period of 1.00 s? (b) If the amplitude of the motion is 0.050 m and the period is that specified in part (a), where is the object and in what direction is it moving 0.35 s after it has passed the equilibrium position, moving downward? (c) What force (magnitude and direction) does the spring exert on the object when it is 0.030 m below the equilibrium position, moving upward?

Problem 89P Don’t Miss the Boat. While on a visit to Minnesota (“Land of 10,000 Lakes”), you sign up to take an excursion around one of the larger lakes. When you go to the dock where the 1500-kg boat is tied, you find that the boat is bobbing up and down in the waves, executing simple harmonic motion with amplitude 20 cm. The boat takes 3.5 s to make one complete up-and-down cycle. When the boat is at its highest point, its deck is at the same height as the stationary dock. As you watch the boat bob up and down, you (mass 60 kg) begin to feel a bit woozy, due in part to the previous night’s dinner of lutefisk. As a result, you refuse to board the boat unless the level of the boat’s deck is within 10 cm of the dock level. How much time do you have to board the boat comfortably during each cycle of up-and-down motion?

An interesting, though highly impractical example of oscillation is the motion of an object dropped down a hole that extends from one side of the earth, through its center, to the other side. With the assumption (not realistic) that the earth is a sphere of uniform density, prove that the motion is simple harmonic and find the period. [Note: The gravitational force on the object as a function of the object’s distance \(r\) from the center of the earth was derived in Example 13.10 (Section 13.6). The motion is simple harmonic if the acceleration \(a_{x}\) and the displacement from equilibrium \(x\) are related by Eq. (14.8), and the period is then \(T=2 \pi / \omega\) Equation Transcription: Text Transcription: r a_x x T=2 \pi / \omega

Problem 91P A rifle bullet with mass 8.00 g and initial horizontal velocity 280 m/s strikes and embeds itself in a block with mass 0.992 kg that rests on a frictionless surface and is attached to one end of an ideal spring. The other end of the spring is attached to the wall. The impact compresses the spring a maximum distance of 18.0 cm. After the impact, the block moves in SHM. Calculate the period of this motion.

For a certain oscillator the net force on the body with mass \(m\) is given by \(F_{x}=-c x^{3}\) (a) What is the potential energy function for this oscillator if we take \(U=0\) at \(x=0\)? (b) One-quarter of a period is the time for the body to move from \(x=0\) to \(x=A\) Calculate this time and hence the period. [Hint: Begin with Eq. (14.20), modified to include the potential-energy function you found in part (a), and solve for the velocity \(v_{x}\) as a function of \(x\). Then replace \(v_{x}\) with \(d x / d t\) Separate the variable by writing all factors containing \(x\) on one side and all factors containing \(t\) on the other side so that each side can be integrated. In the \(x \text {-integral }\)make the change of variable \(u=x / A\) The resulting integral can be evaluated by numerical methods on a computer and has the value \(\zeta_{0}^{1} d u / \sqrt{1-u^{4}}=1.31\). ] (c) According to the result you obtained in part (b), does the period depend on the amplitude \(A\) of the motion? Are the oscillations simple harmonic? Equation Transcription: Text Transcription: m Fx = -cx^3 U=0 x=0 x=0 x=A vx x dx/dt x t x-integral u=x/A \(\zeta_0^1 d u / \sqrt 1-u^4=1.31\) A

An approximation for the potential energy of a KCl molecule is \(U=A\left[\left(R_{0}^{7} / 8 r^{8}\right)-1 / r\right]\) where \(R_{0}=2.67 \times 10^{-10} \mathrm{~m}, A=2.31 \times 10^{-28} \mathrm{~J} \cdot \mathrm{m}\) , and \(r\) is the distance between the two atoms. Using this approximation: (a) Show that the radial component of the force on each atom is \(F_{r}=A\left[\left(R_{0}^{7} / r^{9}\right)-1 / r^{2}\right]\) (b) Show that \(R_{0}\) is the equilibrium separation. (c) Find the minimum potential energy. (d) Use \(r=R_{0}+x\) and the first two terms of the binomial theorem (Eq. 14.28) to show that \(F_{r} \approx-\left(7 A / R_{0}^{3}\right) x\) so that the molecule’s force constant is \(k=7 A / R_{0}^{3}\) (e) With both the K and Cl atoms vibrating in opposite directions on opposite sides of the molecule’s center of mass, \(m_{1} m_{2} /\left(m_{1}+m_{2}\right)=3.06 \times 10^{-26} \mathrm{~kg}\) is the mass to use in calculating the frequency. Calculate the frequency of small-amplitude vibrations. Equation Transcription: Text Transcription: U=A\left[\left(R_0^7 / 8 r^8\right)-1 / r\right] R_0=2.67 x 10^-10m, A=2.31 x 10^-28 J dot m R Fr=AR_0^7/r^9)-1/r^2 R_0 r=R_0+ x F_r \approx-\left(7 A / R_0^3\right) x k=7A/R_0^3 m_1m_2/(m_1+m_2) =3.06 x 10^-26 kg

Problem 94P CP Two uniform solid spheres, each with mass M = 0.800 kg and radius R = 0.0800 m, are connected by a short, light rod that is along a diameter of each sphere and are at rest on a horizontal tabletop. A spring with force constant k = 160 N/m has one end attached to the wall and the other end attached to a frictionless ring that passes over the rod at the center of mass of the spheres, which is midway between the centers of the two spheres. The spheres are each pulled the same distance from the wall, stretching the spring, and released. There is sufficient friction between the tabletop and the spheres for the spheres to roll without slipping as they move back and forth on the end of the spring. Show that the motion of the center of mass of the spheres is simple harmonic and calculate the period.

In Fig. P14.95 the upper ball is released from rest, collides with the stationary lower ball, and sticks to it. The strings are both \(50.0 \mathrm{~cm}\) long. The upper ball has mass \(2.00 \mathrm{~kg}\), and it is initially \(10.0 \mathrm{~cm}\) higher than the lower ball, which has mass \(3.00 \mathrm{~kg}\). Find the frequency and maximum angular displacement of the motion after the collision. Equation Transcription: Text Transcription: 50.0 cm 2.00 kg 10.0 cm 3.00 kg

T. rex. Model the leg of the T. rex in Example 14.10 (Section 14.6) as two uniform rods, each \(1.55 \mathrm{~m}\) long, joined rigidly end to end. Let the lower rod have mass \(M\) and the upper rod mass \(2 M\). The composite object is pivoted about the top of the upper rod. Compute the oscillation period of this object for small-amplitude oscillations. Compare your result to that of Example 14.10. Equation Transcription: Text Transcription: 1.55 m M 2 M

A slender, uniform, metal rod with mass M is pivoted without friction about an axis through its midpoint and perpendicular to the rod. A horizontal spring with force constant k is attached to the lower end of the rod, with the other end of the spring attached to a rigid support. If the rod is displaced by a small angle \(\Theta\) from the vertical (Fig. P14.97) and released, show that it moves in angular SHM and calculate the period. (Hint: Assume that the angle \(\Theta\) is small enough for the approximations \(\sin \theta \approx \Theta\) and \(\cos \theta \approx 1\) to be valid. The motion is simple harmonic if \(d^2 \theta / d t^2=-\omega^2 \theta\), and the period is then \(T=2 \pi / \omega\).)

Problem 98P The Silently Ringing Bell. A large, 34.0-kg bell is hung from a wooden beam so it can swing back and forth with negligible friction. The bell’s center of mass is 0.60 m below the pivot. The bell’s moment of inertia about an axis at the pivot is 18.0 kg ? m2. The clapper is a small, 1.8-kg mass attached to one end of a slender rod of length L and negligible mass. The other end of the rod is attached to the inside of the bell; the rod can swing freely about the same axis as the bell. What should be the length L of the clapper rod for the bell to ring silently—that is, for the period of oscillation for the bell to equal that of the clapper?

Two identical thin rods, each with mass m and length L, are joined at right angles to form an L-shaped object. This object is balanced on top of a sharp edge (Fig. P14.99). If the L-shaped object is deflected slightly, it oscillates. Find the frequency of oscillation.

The Effective Force Constant of Two Springs. Two springs with the same unstretched length but different force constants \(k_{1} \text { and } k_{2}\) are attached to a block with mass \(m\) on a level, frictionless surface. Calculate the effective force constant \(k_{e f f}\) in each of the three cases (a), (b), and (c) depicted in Fig. P14.101. (The effective force constant is defined by \(\Sigma F_{x}=-k_{e f f} x\)) (d) An object with mass m, suspended from a uniform spring with a force constant \(k\), vibrates with a frequency \(f_{1}\) When the spring is cut in half and the same object is suspended from one of the halves, the frequency is \(f_{2}\) What is the ratio \(f_{2} / f_{1}\)? Equation Transcription: Text Transcription: k_1 and k_2 m k_eff \Sigma F_{x}=-k_{e f f} x k f_1 f_2 f_2/f_1

Two springs, each with unstretched length \(0.200 \mathrm{~m}\) but with different force constants \(k_{1} \text { and } k_{2}\) are attached to opposite ends of a block with mass \(m\) on a level, frictionless surface. The outer ends of the springs are now attached to two pins \(P_{1} \text { and } P_{2}, 0.100 \mathrm{~m}\) from the original positions of the ends of the springs (Fig. P14.102). Let \(k_{1}=2.00 \mathrm{~N} / \mathrm{m}, k_{2}=6.00 \mathrm{~N} / \mathrm{m}\), and \(m=0.100 \mathrm{~kg}\). (a) Find the length of each spring when the block is in its new equilibrium position after the springs have been attached to the pins. (b) Find the period of vibration of the block if it is slightly displaced from its new equilibrium position and released. Equation Transcription: Text Transcription: 0.200 m k_1 and k_2 m P_1 and P_2, 0.100 m k_1=2.00 N/m, k_2=6.00 N/m m=0.100 kg

A Spring with Mass. The preceding problems in this chapter have assumed that the springs had negligible mass. But of course no spring is completely massless. To find the effect of the spring’s mass, consider a spring with mass \(M\), equilibrium length \(L_{0}\)and spring constant \(k\). When stretched or compressed to a length \(L\), the potential energy is \(\frac{1}{2} k x^{2}\) where \(x=L-L_{0}\) (a) Consider a spring, as described above, that has one end fixed and the other end moving with speed \(v\) Assume that the speed of points along the length of the spring varies linearly with distance \(l\) from the fixed end. Assume also that the mass\(M\) of the spring is distributed uniformly along the length of the spring. Calculate the kinetic energy of the spring in terms of \(M \text { and } v\) (Hint: Divide the spring into pieces of length \(\text { dl }\); find the speed of each piece in terms of \(l, v \text { and } L\) ; find the mass of each piece in terms of \(\text { dl, } M \text {, and } L\) and integrate from \(0 \text { to } L\). The result is not \(\frac{1}{2} M v^{2}\) since not all of the spring moves with the same speed.) (b) Take the time derivative of the conservation of energy equation, Eq. (14.21), for a mass \(m\) moving on the end of a \(\text { massels }\) spring. By comparing your results to Eq. (14.8), which defines \(\omega\) show that the angular frequency of oscillation is \(\omega=\sqrt{k / m}\) (c) Apply the procedure of part (b) to obtain the angular frequency of oscillation of \(\omega\)the spring considered in part (a). If the \(\text { effective mass } M^{\prime}\) of the spring is defined by \(\omega=\sqrt{k / M^{\prime}}\)what is \(M^{\prime}\) in terms of \(M\)? Equation Transcription: Text Transcription: M L_0 k L 12kx^2 x=L-L_0 v l M M and v dl l,v and L dl, M, and L 0 to L 1 over 2Mv^2 m massels omega Omega = \sqrt k/m omega effective mass M' Omega = \sqrt k/M' M M

Problem 5E A machine part is undergoing SHM with a frequency of 5.00 Hz and amplitude 1.80 cm. How long does it take the part to go from x = 0 to x = ?1.80 cm?

The analysis of SHM in this chapter ignored the mass of the spring. How does the spriug’s mass change the characteristics of the motion?

Problem 6E In a physics lab, you attach a 0.200-kg air-track glider to the end of an ideal spring of negligible mass and start it oscillating. The elapsed time from when the glider first moves through the equilibrium point to the second time it moves through that point is 2.60 s. Find the spring’s force constant.

Problem 7DQ Two identical gliders on an air track are connected by an ideal spring. Could such a system undergo SHM? Explain. How would the period compare with that of a single glider attached to a spring whose other end is rigidly attached to a stationary object? Explain.

Problem 17DQ Could a standard of time be based on the period of a certain standard pendulum? What advantages and disadvantages would such a standard have compared to the actual present-day standard discussed in Section 1.3?

Weighing a Virus. In February 2004, scientists at Purdue University used a highly sensitive technique to measure the mass of a vaccinia virus (the kind used in smallpox vaccine). The procedure involved measuring the frequency of oscillation of a tiny sliver of silicon (just 30 nm long) with a laser, first without the virus and then after the virus had attached itself to the silicon. The difference in mass caused a change in the frequency. We can model such a process as a mass on a spring. (a) Show that the ratio of the frequency with the virus attached \((f s+v)\) to the frequency without the virus \((f s)\) is given by the formula \(\frac{f s+v}{f s}=\frac{1}{\sqrt{1+\left(m_{v} / m_{s}\right)}}\) where \(m_{v}\) is the mass of the virus and \(m_{v}\) is the mass of the silicon sliver. Notice that it is not necessary to know or measure the force constant of the spring. (b) In some data, the silicon sliver has a mass of \(2.10 \times 10^{-16}\) g and a frequency of \(2.00 \times 10^{15}\) Hz without the virus and \(2.87 \times 10^{14}\) Hz with the virus. What is the mass of the virus, in grams and in femtograms? Equation Transcription: Text Transcription: (fs+v) (fs) fs+v over fs=1 over sqrt 1+(m_v/m_s) m_v m_s 2.10x10^-16 2.00x10^15 2.87x10^14

CALC Jerk. A guitar string vibrates at a frequency of 440 Hz. A point at its center moves in SHM with an amplitude of 3.0 mm and a phase angle of zero. (a) Write an equation for the position of the center of the string as a function of time. (b) What are the maximum values of the magnitudes of the velocity and acceleration of the center of the string? (c) The derivative of the acceleration with respect to time is a quantity called the jerk. Write an equation for the jerk of the center of the string as a function of time, and find the maximum value of the magnitude of the jerk.

For the oscillating object in Fig. E14.4, what are (a) its maximum speed and (b) its maximum acceleration?

Problem 50E A small sphere with mass m is attached to a massless rod of length L that is pivoted at the top, forming a simple pendulum. The pendulum is pulled to one side so that the rod is at an angle ? from the vertical, and released from rest. (a) In a diagram, show the pendulum just after it is released. Draw vectors representing the forces acting on the small sphere and the acceleration of the sphere. Accuracy counts! At this point, what is the linear acceleration of the sphere? (b) Repeat part (a) for the instant when the pendulum rod is at an angle ?/2 from the vertical. (c) Repeat part (a) for the instant when the pendulum rod is vertical. At this point, what is the linear speed of the sphere?

A simple pendulum 2.00 m long swings through a maximum angle of \(30.0^{\circ}\) with the vertical. Calculate its period (a) assuming a small amplitude, and (b) using the first three terms of Eq. (14.35). (c) Which of the answers in parts (a) and (b) is more accurate? For the one that is less accurate, by what percent is it in error from the more accurate answer? Equation Transcription: Text Transcription: 30.0deg

Problem 52E We want to hang a thin hoop on a horizontal nail and have the hoop make one complete small-angle oscillation each 2.0 s. What must the hoop’s radius be?

Problem 55E Two pendulums have the same dimensions (length L) and total mass (m). Pendulum A is a very small ball swinging at the end of a uniform massless bar. In pendulum B, half the mass is in the ball and half is in the uniform bar. Find the period of each pendulum for small oscillations. Which one takes longer for a swing?

A block with mass rests on a frictionless surface and is connected to a horizontal spring of force constant . The other end of the spring is attached to a wall (Fig. P14.72). A second block with mass rests on top of the first block. The coefficient of static friction between the blocks is \(\mu_{s}\). Find the maximum amplitude of oscillation such that the top block will not slip on the bottom block. Equation Transcription: Text Transcription: u_s u_s

Problem 80P An object with mass 0.200 kg is acted on by an elastic restoring force with force constant 10.0 N/m. (a) Graph elastic potential energy U as a function of displacement x over a range of x from - 0.300 m to + 0.300 m. On your graph, let 1 cm = 0.05 J vertically and 1 cm = 0.05 m horizontally. The object is set into oscillation with an initial potential energy of 0.140 J and an initial kinetic energy of 0.060 J. Answer the following questions by refer-ring to the graph. (b) What is the amplitude of oscillation? (c) What is the potential energy when the displacement is one-half the amplitude? (d) At what displacement are the kinetic and potential energies equal? (e) What is the value of the phase angle ? if the initial velocity is positive and the initial displacement is negative?

A 2.00-kg bucket containing 10.0 kg of water is hanging from a vertical ideal spring of force constant 125 N/m and oscillating up and down with an amplitude of 3.00 cm. Suddenly the bucket springs a leak in the bottom such that water drops out at a steady rate of 2.00 g/s. When the bucket is half full. Find (a) the period of oscillation and (b) the rate at which the period is changing with respect to time. Is the period getting longer or shorter? (c) What is the shortest period this system can have?

Problem 82P A hanging wire is 1.80 m long. When a 60.0-kg steel ball is suspended from the wire, the wire stretches by 2.00 mm. If the ball is pulled down a small additional distance and released, at what frequency will it vibrate? Assume that the stress on the wire than the proportional limit (see Section 11.5).

A uniform rod of length oscillates through small angles about a point a distance from its center. (a) Prove that its angular frequency is \(\sqrt{g x /\left[\left(L^{2} / 12\right)+x^{2}\right]}\). (b) Show that its maximum angular frequency occurs when \(x=L / \sqrt{12}\). (c) What is the length of the rod if the maximum angular frequency is \(2 \pi\) \(\mathrm{rad} / \mathrm{s}\)? Equation Transcription: Text Transcription: sqrtgx/[(L^2/12)+x^2] x=L/sqrt12 2pi rad/s