Give one example of a transverse wave and another of a

Problem 71PE Medical Application (a) What is the intensity in W/m2 of a laser beam used to burn away cancerous tissue that, when 90.0% absorbed, puts 500 J of energy into a circular spot 2.00 mm in diameter in 4.00 s? (b) Discuss how this intensity compares to the average intensity of sunlight (about 700 W/m2 ) and the implications that would have if the laser beam entered your eye. Note how your answer depends on the time duration of the exposure.

Problem 1CQ Describe a system in which elastic potential energy is stored.

Problem 2PE It is weigh-in time for the local under-85-kg rugby team. The bathroom scale used to assess eligibility can be described by Hooke’s law and is depressed 0.75 cm by its maximum load of 120 kg. (a) What is the spring’s effective spring constant? (b) A player stands on the scales and depresses it by 0.48 cm. Is he eligible to play on this under-85 kg team?

Problem 2CQ What conditions must be met to produce simple harmonic motion?

Problem 1PE Fish are hung on a spring scale to determine their mass (most fishermen feel no obligation to truthfully report the mass). (a) What is the force constant of the spring in such a scale if it the spring stretches 8.00 cm for a 10.0 kg load? (b) What is the mass of a fish that stretches the spring 5.50 cm? (c) How far apart are the half-kilogram marks on the scale?

Problem 3CQ (a) If frequency is not constant for some oscillation, can the oscillation be simple harmonic motion? (b) Can you think of any examples of harmonic motion where the frequency may depend on the amplitude?

Problem 4CQ Give an example of a simple harmonic oscillator, specifically noting how its frequency is independent of amplitude.

Problem 4PE (a) The springs of a pickup truck act like a single spring with a force constant of 1.30 × 105 N/m . By how much will the truck be depressed by its maximum load of 1000 kg? (b) If the pickup truck has four identical springs, what is the force constant of each?

Problem 3PE One type of BB gun uses a spring-driven plunger to blow the BB from its barrel. (a) Calculate the force constant of its plunger’s spring if you must compress it 0.150 m to drive the 0.0500-kg plunger to a top speed of 20.0 m/s. (b) What force must be exerted to compress the spring?

Problem 5CQ Explain why you expect an object made of a stiff material to vibrate at a higher frequency than a similar object made of a spongy material.

Problem 5PE When an 80.0-kg man stands on a pogo stick, the spring is compressed 0.120 m. (a) What is the force constant of the spring? (b) Will the spring be compressed more when he hops down the road?

Problem 6CQ As you pass a freight truck with a trailer on a highway, you notice that its trailer is bouncing up and down slowly. Is it more likely that the trailer is heavily loaded or nearly empty? Explain your answer.

Problem 6PE A spring has a length of 0.200 m when a 0.300-kg mass hangs from it, and a length of 0.750 m when a 1.95-kg mass hangs from it. (a) What is the force constant of the spring? (b) What is the unloaded length of the spring?

Problem 7CQ Some people modify cars to be much closer to the ground than when manufactured. Should they install stiffer springs? Explain your answer.

What is the period of \(60.0 \mathrm{~Hz}\) electrical power?

Problem 8CQ Pendulum clocks are made to run at the correct rate by adjusting the pendulum’s length. Suppose you move from one city to another where the acceleration due to gravity is slightly greater, taking your pendulum clock with you, will you have to lengthen or shorten the pendulum to keep the correct time, other factors remaining constant? Explain your answer.

Problem 8PE If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds?

Problem 9CQ Explain in terms of energy how dissipative forces such as friction reduce the amplitude of a harmonic oscillator. Also explain how a driving mechanism can compensate. (A pendulum clock is such a system.)

Problem 9PE Find the frequency of a tuning fork that takes 2.50×10?3 s to complete one oscillation.

Problem 10CQ Give an example of a damped harmonic oscillator. (They are more common than undamped or simple harmonic oscillators.)

Problem 10PE A stroboscope is set to flash every 8.00×10?5 s . What is the frequency of the flashes?

Problem 11CQ How would a car bounce after a bump under each of these conditions? • overdamping • underdamping • critical damping

Problem 11PE A tire has a tread pattern with a crevice every 2.00 cm. Each crevice makes a single vibration as the tire moves. What is the frequency of these vibrations if the car moves at 30.0 m/s?

Problem 12CQ Most harmonic oscillators are damped and, if undriven, eventually come to a stop. How is this observation related to the second law of thermodynamics?

Problem 12PE Engineering Application Each piston of an engine makes a sharp sound every other revolution of the engine. (a) How fast is a race car going if its eight-cylinder engine emits a sound of frequency 750 Hz, given that the engine makes 2000 revolutions per kilometer? (b) At how many revolutions per minute is the engine rotating?

Problem 13CQ Why are soldiers in general ordered to “route step” (walk out of step) across a bridge?

Problem 13PE A type of cuckoo clock keeps time by having a mass bouncing on a spring, usually something cute like a cherub in a chair. What force constant is needed to produce a period of 0.500 s for a 0.0150-kg mass?

Problem 14PE If the spring constant of a simple harmonic oscillator is doubled, by what factor will the mass of the system need to change in order for the frequency of the motion to remain the same?

Problem 15CQ What is the difference between propagation speed and the frequency of a wave? Does one or both affect wavelength? If so, how?

Problem 15PE A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s?

Problem 16CQ Speakers in stereo systems have two color-coded terminals to indicate how to hook up the wires. If the wires are reversed, the speaker moves in a direction opposite that of a properly connected speaker. Explain why it is important to have both speakers connected the same way.

Problem 16PE By how much leeway (both percentage and mass) would you have in the selection of the mass of the object in the previous problem if you did not wish the new period to be greater than 2.01 s or less than 1.99 s?

Problem 17CQ Two identical waves undergo pure constructive interference. Is the resultant intensity twice that of the individual waves? Explain your answer.

Problem 17PE Suppose you attach the object with mass m to a vertical spring originally at rest, and let it bounce up and down. You release the object from rest at the spring’s original rest length. (a) Show that the spring exerts an upward force of 2.00 mg on the object at its lowest point. (b) If the spring has a force constant of 10.0 N/m and a 0.25-kg-mass object is set in motion as described, find the amplitude of the oscillations. (c) Find the maximum velocity.

Problem 18CQ Circular water waves decrease in amplitude as they move away from where a rock is dropped. Explain why.

Problem 18PE A diver on a diving board is undergoing simple harmonic motion. Her mass is 55.0 kg and the period of her motion is 0.800 s. The next diver is a male whose period of simple harmonic oscillation is 1.05 s. What is his mass if the mass of the board is negligible?

Problem 19PE Suppose a diving board with no one on it bounces up and down in a simple harmonic motion with a frequency of 4.00 Hz. The board has an effective mass of 10.0 kg. What is the frequency of the simple harmonic motion of a 75.0-kg diver on the board?

The device pictured in Figure \(16.46\) entertains infants while keeping them from wandering. The child bounces in a harness suspended from a door frame by a spring constant. (a) If the spring stretches \(0.250 m\) while supporting an \(8.0-kg\) child, what is its spring constant? (b) What is the time for one complete bounce of this child? (c) What is the child’s maximum velocity if the amplitude of her bounce is \(0.200 m\)? Equation Transcription: Text Transcription: 16.46 0.250 m 8.0-kg 0.200 m

Problem 22PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. What is the length of a pendulum that has a period of 0.500 s?

Problem 23PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. Some people think a pendulum with a period of 1.00 s can be driven with “mental energy” or psycho kinetically, because its period is the same as an average heartbeat. True or not, what is the length of such a pendulum?

A \(90.0-kg\) skydiver hanging from a parachute bounces up and down with a period of \(1.50 s\). What is the new period of oscillation when a second skydiver, whose mass is \(60.0 kg\), hangs from the legs of the first, as seen in Figure \(16.47\). Equation Transcription: Text Transcription: 90.0-kg 1.50 s 60.0 kg 16.47

Problem 24PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. What is the period of a 1.00-m-long pendulum?

Problem 25PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. How long does it take a child on a swing to complete one swing if her center of gravity is 4.00 m below the pivot?

Problem 26PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. The pendulum on a cuckoo clock is 5.00 cm long. What is its frequency?

Problem 27PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. Two parakeets sit on a swing with their combined center of mass 10.0 cm below the pivot. At what frequency do they swing?

Problem 29PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. A pendulum with a period of 2.00000 s in one location (g = 9.80 m/s2) is moved to a new location where the period is now 1.99796 s. What is the acceleration due to gravity at its new location?

Problem 28PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. (a) A pendulum that has a period of 3.00000 s and that is located where the acceleration due to gravity is 9.79 m/s2 is moved to a location where it the acceleration due to gravity is 9.82 m/s2 . What is its new period? (b) Explain why so many digits are needed in the value for the period, based on the relation between the period and the acceleration due to gravity.

Problem 30PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. (a) What is the effect on the period of a pendulum if you double its length? (b) What is the effect on the period of a pendulum if you decrease its length by 5.00%?

Problem 31PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. Find the ratio of the new/old periods of a pendulum if the pendulum were transported from Earth to the Moon, where the acceleration due to gravity is 1.63 m/s2 .

Problem 32PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. At what rate will a pendulum clock run on the Moon, where the acceleration due to gravity is 1.63 m/s2 , if it keeps time accurately on Earth? That is, find the time (in hours) it takes the clock’s hour hand to make one revolution on the Moon.

Problem 33PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. Suppose the length of a clock’s pendulum is changed by 1.000%, exactly at noon one day. What time will it read 24.00 hours later, assuming it the pendulum has kept perfect time before the change? Note that there are two answers, and perform the calculation to four-digit precision.

Problem 34PE As usual, the acceleration due to gravity in these problems is taken to be g = 9.80 m / s2 , unless otherwise specified. If a pendulum-driven clock gains 5.00 s/day, what fractional change in pendulum length must be made for it to keep perfect time?

Problem 35PE The length of nylon rope from which a mountain climber is suspended has a force constant of 1.40 × 104 N/m . (a) What is the frequency at which he bounces, given his mass plus and the mass of his equipment are 90.0 kg? (b) How much would this rope stretch to break the climber’s fall if he free-falls 2.00 m before the rope runs out of slack? Hint: Use conservation of energy. (c) Repeat both parts of this problem in the situation where twice this length of nylon rope is used.

Problem 36PE Engineering Application Near the top of the Citigroup Center building in New York City, there is an object with mass of 4.00 × 105 kg on springs that have adjustable force constants. Its function is to dampen wind-driven oscillations of the building by oscillating at the same frequency as the building is being driven—the driving force is transferred to the object, which oscillates instead of the entire building. (a) What effective force constant should the springs have to make the object oscillate with a period of 2.00 s? (b) What energy is stored in the springs for a 2.00-m displacement from equilibrium?

Problem 37PE (a)What is the maximum velocity of an 85.0-kg person bouncing on a bathroom scale having a force constant of 1.50×106 N/m , if the amplitude of the bounce is 0.200 cm? (b)What is the maximum energy stored in the spring?

Problem 38PE A novelty clock has a 0.0100-kg mass object bouncing on a spring that has a force constant of 1.25 N/m. What is the maximum velocity of the object if the object bounces 3.00 cm above and below its equilibrium position? (b) How many joules of kinetic energy does the object have at its maximum velocity?

Problem 39PE At what positions is the speed of a simple harmonic oscillator half its maximum? That is, what values of x / X give v = ±vmax / 2 , where X is the amplitude of the motion?

Problem 40PE A ladybug sits 12.0 cm from the center of a Beatles music album spinning at 33.33 rpm. What is the maximum velocity of its shadow on the wall behind the turntable, if illuminated parallel to the record by the parallel rays of the setting Sun?

Problem 41PE The amplitude of a lightly damped oscillator decreases by 3.0% during each cycle. What percentage of the mechanical energy of the oscillator is lost in each cycle?

Problem 42PE How much energy must the shock absorbers of a 1200-kg car dissipate in order to damp a bounce that initially has a velocity of 0.800 m/s at the equilibrium position? Assume the car returns to its original vertical position.

Problem 43PE If a car has a suspension system with a force constant of 5.00 × 104 N/m , how much energy must the car’s shocks remove to dampen an oscillation starting with a maximum displacement of 0.0750 m?

Problem 45PE Suppose you have a 0.750-kg object on a horizontal surface connected to a spring that has a force constant of 150 N/m. There is simple friction between the object and surface with a static coefficient of friction µs = 0.100 . (a) How far can the spring be stretched without moving the mass? (b) If the object is set into oscillation with an amplitude twice the distance found in part (a), and the kinetic coefficient of friction is µk = 0.0850 , what total distance does it travel before stopping? Assume it starts at the maximum amplitude.

Problem 44PE (a) How much will a spring that has a force constant of 40.0 N/m be stretched by an object with a mass of 0.500 kg when hung motionless from the spring? (b) Calculate the decrease in gravitational potential energy of the 0.500-kg object when it descends this distance. (c) Part of this gravitational energy goes into the spring. Calculate the energy stored in the spring by this stretch, and compare it with the gravitational potential energy. Explain where the rest of the energy might go.

Problem 46PE Engineering Application: A suspension bridge oscillates with an effective force constant of 1.00×108 N/m . (a) How much energy is needed to make it oscillate with an amplitude of 0.100 m? (b) If soldiers march across the bridge with a cadence equal to the bridge’s natural frequency and impart 1.00 × 104 J of energy each second, how long does it take for the bridge’s oscillations to go from 0.100 m to 0.500 m amplitude?

Problem 47PE Storms in the South Pacific can create waves that travel all the way to the California coast, which are 12,000 km away. How long does it take them if they travel at 15.0 m/s?

Problem 48PE Waves on a swimming pool propagate at 0.750 m/s. You splash the water at one end of the pool and observe the wave go to the opposite end, reflect, and return in 30.0 s. How far away is the other end of the pool?

Problem 49PE Wind gusts create ripples on the ocean that have a wavelength of 5.00 cm and propagate at 2.00 m/s. What is their frequency?

Problem 50PE How many times a minute does a boat bob up and down on ocean waves that have a wavelength of 40.0 m and a propagation speed of 5.00 m/s?

Problem 51PE Scouts at a camp shake the rope bridge they have just crossed and observe the wave crests to be 8.00 m apart. If they shake it the bridge twice per second, what is the propagation speed of the waves?

Problem 54PE Radio waves transmitted through space at 3.00 × 108 m/s by the Voyager spacecraft have a wavelength of 0.120 m. What is their frequency?

Problem 52PE What is the wavelength of the waves you create in a swimming pool if you splash your hand at a rate of 2.00 Hz and the waves propagate at 0.800 m/s?

Problem 53PE What is the wavelength of an earthquake that shakes you with a frequency of 10.0 Hz and gets to another city 84.0 km away in 12.0 s?

Problem 55PE Your ear is capable of differentiating sounds that arrive at the ear just 1.00 ms apart. What is the minimum distance between two speakers that produce sounds that arrive at noticeably different times on a day when the speed of sound is 340 m/s?

(a) Seismographs measure the arrival times of earthquakes with a precision of \(0.100 s\). To get the distance to the epicenter of the quake, they compare the arrival times of \(S\)- and \(P\)-waves, which travel at different speeds. Figure \(16.48\)) If \(S\)- and \(P\)-waves travel at \(4.00\) and \(7.20 km/s\), respectively, in the region considered, how precisely can the distance to the source of the earthquake be determined? (b) Seismic waves from underground detonations of nuclear bombs can be used to locate the test site and detect violations of test bans. Discuss whether your answer to (a) implies a serious limit to such detection. (Note also that the uncertainty is greater if there is an uncertainty in the propagation speeds of the \(S\)- and \(P\)-waves.) Equation Transcription: Text Transcription: 0.100 s S P 16.48 4.00 7.20 km/s

Problem 59PE Two tuning forks having frequencies of 460 and 464 Hz are struck simultaneously. What average frequency will you hear, and what will the beat frequency be?

Problem 57PE A car has two horns, one emitting a frequency of 199 Hz and the other emitting a frequency of 203 Hz. What beat frequency do they produce?

Problem 60PE Twin jet engines on an airplane are producing an average sound frequency of 4100 Hz with a beat frequency of 0.500 Hz. What are their individual frequencies?

Problem 58PE The middle-C hammer of a piano hits two strings, producing beats of 1.50 Hz. One of the strings is tuned to 260.00 Hz. What frequencies could the other string have?

Problem 61PE A wave traveling on a Slinky® that is stretched to 4 m takes 2.4 s to travel the length of the Slinky and back again. (a) What is the speed of the wave? (b) Using the same Slinky stretched to the same length, a standing wave is created which consists of three antinodes and four nodes. At what frequency must the Slinky be oscillating?

Problem 62PE Three adjacent keys on a piano (F, F-sharp, and G) are struck simultaneously, producing frequencies of 349, 370, and 392 Hz. What beat frequencies are produced by this discordant combination?

Problem 63PE Medical Application Ultrasound of intensity 1.50 × 102 W/m2 is produced by the rectangular head of a medical imaging device measuring 3.00 by 5.00 cm. What is its power output?

Problem 64PE The low-frequency speaker of a stereo set has a surface area of 0.05 m2 and produces 1W of acoustical power. What is the intensity at the speaker? If the speaker projects sound uniformly in all directions, at what distance from the speaker is the intensity 0.1 W/m2 ?

Problem 65PE To increase intensity of a wave by a factor of 50, by what factor should the amplitude be increased?

Problem 66PE Engineering Application A device called an insolation meter is used to measure the intensity of sunlight has an area of 100 cm2 and registers 6.50 W. What is the intensity in W/m2 ?

Problem 67PE Astronomy Application Energy from the Sun arrives at the top of the Earth’s atmosphere with an intensity of 1.30 kW/m2 . How long does it take for 1.8×109 J to arrive on an area of 1.00 m2 ?

Problem 69PE Engineering Application (a) A photovoltaic array of (solar cells) is 10.0% efficient in gathering solar energy and converting it to electricity. If the average intensity of sunlight on one day is 700 W/m2 , what area should your array have to gather energy at the rate of 100 W? (b) What is the maximum cost of the array if it must pay for itself in two years of operation averaging 10.0 hours per day? Assume that it earns money at the rate of 9.00 ¢ per kilowatt-hour.

Problem 68PE Suppose you have a device that extracts energy from ocean breakers in direct proportion to their intensity. If the device produces 10.0 kW of power on a day when the breakers are 1.20 m high, how much will it produce when they are 0.600 m high?

Problem 70PE A microphone receiving a pure sound tone feeds an oscilloscope, producing a wave on its screen. If the sound intensity is originally 2.00×10–5 W/m2 , but is turned up until the amplitude increases by 30.0%, what is the new intensity?

Problem 14CQ Give one example of a transverse wave and another of a longitudinal wave, being careful to note the relative directions of the disturbance and wave propagation in each.